Search found 80 matches
- Sat Feb 18, 2006 3:08 pm
- Forum: s300 / SManager
- Topic: 12 psi JRSC base map??
- Replies: 14
- Views: 5403
- Tue Feb 14, 2006 5:02 pm
- Forum: s300 / SManager
- Topic: problem loading basemap.
- Replies: 4
- Views: 2820
files
file, open, click file name"b18supercharger440" then a prompt appears and says "floating point division by zero" then i click ok. then it goes to the next prompt "CONVERT V3 ROM" change to 440 injectors then click ok and all the fuel maps and ignition maps in the tables...
- Mon Feb 13, 2006 10:34 pm
- Forum: s300 / SManager
- Topic: problem loading basemap.
- Replies: 4
- Views: 2820
problem loading basemap.
floating point division by zero is the prompt i am getting when loading a basebin file. after everything is loaded there is no fuel and ignition tables. can someone help me or tell me why this is happening.
- Mon Feb 13, 2006 11:00 am
- Forum: s300 / SManager
- Topic: tuning high speed fuel tables.
- Replies: 7
- Views: 5685
a/f in the mid 13s?! isn't that too lean? i've seen n/a cars tuned to low 13s. doesn't make sense that a boosted car would run leaner than that. thats why i am tryin to figure out how to tune in the high speed fuel tables. i am not driving around in boost, i just did one run in boost and those were...
- Mon Feb 13, 2006 11:00 am
- Forum: s300 / SManager
- Topic: tuning high speed fuel tables.
- Replies: 7
- Views: 5685
a/f in the mid 13s?! isn't that too lean? i've seen n/a cars tuned to low 13s. doesn't make sense that a boosted car would run leaner than that. thats why i am tryin to figure out how to tune in the high speed fuel tables. i am not driving around in boost, i just did one run in boost and those were...
- Sun Feb 12, 2006 12:42 pm
- Forum: s300 / SManager
- Topic: tuning high speed fuel tables.
- Replies: 7
- Views: 5685
tuning high speed fuel tables.
how do i go about tuning high speed fuel tables? i cant go into high speed fuel tables. i am trying to tune for boost. my a/f is mid 13's in boost columns. i can tune the boost columns in the low speed but won't let me see the columns for high spee. how do i go about doing this. thanks for the help.
- Fri Feb 10, 2006 2:21 pm
- Forum: s300 / SManager
- Topic: what calibration should i use?
- Replies: 0
- Views: 1494
what calibration should i use?
hi, i have a wideband first off so i can tune myself. i was wondering which calibration i should use. one thats close to my engine setup or one that matches my ecu. I have a p28 obd2b which is an obd1 ecu just with the conversion already on the ecu. i have a b18c5 84mm bore dart block 9:4:1 w itr ca...
- Thu Feb 09, 2006 11:41 am
- Forum: s300 / SManager
- Topic: need base map for turbo gsr
- Replies: 3
- Views: 3665
HA SPUNK, hopefully you can add to my question. i have a b18c5 84 mm bore with your hondata p28 obd2b ecu. if i would like to create my own and new basemap, which file should i use. the p28 file, the p72 file (since it is for a b18). in other words, should i choose the name of the file or the descri...
- Thu Feb 09, 2006 8:30 am
- Forum: s300 / SManager
- Topic: mis fire when cold start
- Replies: 5
- Views: 2979
- Tue Feb 07, 2006 1:31 pm
- Forum: s300 / SManager
- Topic: mis fire when cold start
- Replies: 5
- Views: 2979
- Tue Feb 07, 2006 9:34 am
- Forum: s300 / SManager
- Topic: mis fire when cold start
- Replies: 5
- Views: 2979
mis fire when cold start
i have s300 and at cold start only i can hear the sound of a misfire and small pop in the exhaust almost like a back fire but very mild. once the car is heated up there is no more misfire....any suggestions. do you think my timing is off on the crank from what it is on my s300 ignition tables? any t...
- Tue Feb 07, 2006 8:08 am
- Forum: s300 / SManager
- Topic: "Invert Purge Valve" 1.1.2 Feature - Reset when op
- Replies: 3
- Views: 2721
- Sun Feb 05, 2006 9:05 am
- Forum: s300 / SManager
- Topic: hondata s300 b16a
- Replies: 5
- Views: 3784
re
i figured i should hook my wideband up that way. but the way i have it is same thing but with the eld as my wideband. i think i am going to hook it up the way you did because i am not getting the right numbers in the cinversion with the eld being hooked up. how accurate is the datalogg wideband and ...
- Sat Feb 04, 2006 11:39 am
- Forum: s300 / SManager
- Topic: hondata s300 b16a
- Replies: 5
- Views: 3784
hey gezzuzz3, this has nothing to do w your post, but how did you wire up your wideband? do you have the plx? did you wire up the wideband to the eld and the narrowband to the oem o2 sensor input wire? i'm asking this because you and i might have the same setup.....that is how i have mine wired up a...
- Fri Feb 03, 2006 10:08 pm
- Forum: s300 / SManager
- Topic: need b18c5 base map?
- Replies: 0
- Views: 1423
need b18c5 base map?
anybody have a base map for a b18c5 84 mm bore , rc 440 injectors, jrsc 8lbs or any type of b18 base map to get me a little closer...thanks