Hondata

You can't go by RPM as that has nothing to do with the AF ratio. withthe car not running and the key in the on position, the PLX should be on and you will be able to datalog and get the voltage offset right as it will not be fluctuating as much. i was not trying to set the voltage off set. these nu...

still having this problem, any suggestions?

Voltage output from the white wire on the PLX M-300

Idle: 3.5
2k: 4.2
3k: 4.5
4k: 3.9

I did note the tach is off by 200rpm, so above will be off by 200rpm.

I don't know, when hooked up in method #1, the data log will not follow the plx accurately?

any thoughs. thanks.

You will need to use a multi meter ans see what the outputs form the PLX are doing...the display for hte plx may be workign, but the outputs may not be. I already did that, the output from the white wire on the plx is fine? i will go today and hold the rpm at 1,2,3,4K and log the output with my mul...

Since I do not have your vehicle in front of me to see what you have done it is nearly impossible to tell what the problem is. I personally own 3 cars with the PLX setup using method #1 and did not need to remove any resistor or do anything beyond what is in the instructions. I just removed the res...

ok, so I was playing with the low speed fuel and for the hell of it, I decided to try and rich-en up 4 boxes that were highlighted while the car was idling, I wanted to see the change it made in a/f on the plx. it worked fine, but I noticed that the live datalog a/f did not follow the plx as the tab...

using the offset voltage, I am trying to match the M-300 to the logger display. I have it close. using -0.9v but its hard to get it perfect. the car is running while I am trying to do this, my M-300 display flucuates quite quickly and the logger is more steady. is that right? am I doing it wrong? th...

Thanks for the post.

Ok, so this thought just came to me. I posted before looking for a turbo h22 map, with out success. What I am wondering now is, can I load the stock h22 map then go into options and select ?show boost tables? and use the map generated as a starting point for my application?

Thanks.

Alright, seriously 1 minute after I posted this question, I clicked on options and show boost tables and there they were, 11-12-13.... I assume I just answered my own question. If not please direct me in the right direction.

Thanks.

Noob to tuning. My question is, if I want to go turbo. What do I do with the n/a map besides changing the ignition timing and fuel tables accordingly? Do I need to add forced induction columns too? For example, b11-b12-b13? I have looked in the provided maps under the b16greddy and revhard, but I di...

Stock H22 with drag turbo kit. Please email me hiperformancenews@hotmail.com

Thanks.