Hondata

Is it possible to do flat shifting on crz?

Great. Thanx

Team hondata,

If i put in stroker kit to my engine, is there be any problem with the tuning with flashpro? There was 1.7L stroker kit in thailand. I would like to try it. But i need to know that tuning will not be a problem before buying the parts.

Emm ok. What a miss. No exhaust popping.

Is there any plan in the future to have it in CRZ or it is just impossible.

Is it possible to retard ignition in launch control setting. I saw in few model it is an option but cannot find it in crz.

That statement really help. Thank you.

When i switch from 310cc to 550cc injector and retune, the tuner did not change the injector size in flashpro manager with the reason that if we change the input to 550cc, we will have a negative value at lower rpm and pressure. I am not very convinced by him as in my opinion we should give an accur...

Hi guys. Just one question. If i swith to a bigger injector; 560cc, is it possible to have a negative value in my fuel table at the lower rpm, in vacum row?

Does the Asia crz have this IMA torque request? Where can we find it?

I will try to clean it and check all wires and connection. Is that mean it is still partially used by ecu even was disable. In case the AFM was faulty or damage we still have to replace it. Am i rite?

No, never. I just keep it in place but disable it in the setting. Should i disconnect the sensor?

I have a look into my OBD2 diagnostic and found out P101 error code. Could the break coused by the AFM?

Basically i already unclick the AFM in my setting. Is that mean even we did not enable the AFM it is still use by the ECU? Is it possible to totally remove the AFM?

Ok thank you. I will do a log and come back to you.

When my boost raised above 0.6 bar my car was jerking at higher RPM but I can floor with 0.5 bar. Is it the boost cut? In the rev limit tabs, my boost limit was set at 1.2 bar. Is there any place should I look into? Please advice.