Search found 48 matches

by CHB
Mon Feb 26, 2018 3:51 pm
Forum: K-Pro / KManager
Topic: RSX Base PND Hondata Kpro4 A/F Reading problem.
Replies: 9
Views: 1800

Re: RSX Base PND Hondata Kpro4 A/F Reading problem.

Hi Spunkster, 1) What is the norminal voltage between A16 and A16 in a normal operational ECU? 2) If the Primary A/F sensor Heater is not working, will it affect the A/F sensor reading as well? 3) Do I need to plug into an identical vehicle (Base RSX K20A3 with 5 speed manual and PND ECU) or it can ...
by CHB
Sun Feb 25, 2018 1:03 am
Forum: K-Pro / KManager
Topic: RSX Base PND Hondata Kpro4 A/F Reading problem.
Replies: 9
Views: 1800

Re: RSX Base PND Hondata Kpro4 A/F Reading problem.

I've attached the calibration and the datalog in this post.
by CHB
Sun Feb 25, 2018 12:09 am
Forum: K-Pro / KManager
Topic: RSX Base PND Hondata Kpro4 A/F Reading problem.
Replies: 9
Views: 1800

RSX Base PND Hondata Kpro4 A/F Reading problem.

Hi Hondata, I have been hunting the A/F Sensor problem on my RSX/DC5 Base K20A3. When the ignition is on (engine off), the A/F reads 14.70. When i crank and started the engine, the A/F Reading on the display dropped to 10.70. I have tried to leave the primary A/F sensor plugged into the exhaust stre...
by CHB
Fri Jan 05, 2018 11:24 pm
Forum: K-Pro / KManager
Topic: K-Series VTEC Solenoid Pressure Switch
Replies: 3
Views: 2095

Re: K-Series VTEC Solenoid Pressure Switch

IF using a US ECU it will detect if there is enough pressure to activate VTEC, if it does not have pressure it will not activate VTEC. It will not activate VTEC, but will it kick into limb mode? It is Australia DC5 RSX Base PND ECU with Kpro4. Engine is K24A1 Turbo with VTEC Killer (K20A Type R cam...
by CHB
Fri Jan 05, 2018 7:35 am
Forum: K-Pro / KManager
Topic: K-Series VTEC Solenoid Pressure Switch
Replies: 3
Views: 2095

K-Series VTEC Solenoid Pressure Switch

Hi Hondata, First of all, I am not asking about the oil pressure switch on the engine block. The VTEC solenoid pressure switch I meant here is the one next to VTEC solenoid. Will Kpro4 scan the status of this switch if the engine operating RPM is less than what the VTEC activation RPM? Let say VTEC ...
by CHB
Thu Nov 30, 2017 8:47 pm
Forum: KManager Display Templates
Topic: Hondata Kpro4 APP on Double Din Android?
Replies: 11
Views: 35564

Re: Hondata Kpro4 APP on Double Din Android?

Sorry I have to rephrase my question.

Can Mobile App runs on an Android and blue-tooth Compatible Double Din Audio Player?
by CHB
Thu Nov 30, 2017 8:09 pm
Forum: K-Pro / KManager
Topic: K24A1 / K20A3 PND Kpro4 VTEC Killer setup
Replies: 5
Views: 2923

Re: K24A1 / K20A3 PND Kpro4 VTEC Killer setup

Hi Spunkster Thanks for your input. Okay now lets forget about the MAP sensor change. VTEC Killer setup will always runs on the Hi-speed cam lobe. I believe I only need to tune the "low speed cam" tables and set VTEC Point higher than the target redline RPM so that the ECU never need to ru...
by CHB
Thu Nov 30, 2017 6:49 am
Forum: K-Pro / KManager
Topic: K24A1 / K20A3 PND Kpro4 VTEC Killer setup
Replies: 5
Views: 2923

Re: K24A1 / K20A3 PND Kpro4 VTEC Killer setup

How about extending the RPM range on the low speed cam?
by CHB
Sun Nov 26, 2017 10:16 pm
Forum: KManager Display Templates
Topic: Hondata Kpro4 APP on Double Din Android?
Replies: 11
Views: 35564

Hondata Kpro4 APP on Double Din Android?

Hi guys
Will the Hondata K-Manager Kpro4 works on those Double Din Audio Player (has Bluetooth compatibility of course)

Don't need it to do datalogging but just to display all the vital informations will be useful.

Any idea?
by CHB
Thu Nov 23, 2017 8:06 pm
Forum: K-Pro / KManager
Topic: K24A1 / K20A3 PND Kpro4 VTEC Killer setup
Replies: 5
Views: 2923

K24A1 / K20A3 PND Kpro4 VTEC Killer setup

Hi Hondata, I now currently running K20A3 PND Kpro4 and it runs flawlessly. I am going to upgrade the engine with "true 3 lobes" cams from K20A Type R and running on the High Speed cam lobes all the time, aka VTEC Killer. Should I tune the ECU with Low Speed Cam (Fuel, Ignition and VTC map...
by CHB
Fri Nov 03, 2017 6:55 pm
Forum: K-Pro / KManager
Topic: Kpro4 Oil Pressure Fail safe
Replies: 1
Views: 1254

Kpro4 Oil Pressure Fail safe

Hi guys,
Is there a way kpro4 can utilise an oil pressure sensor input (analogue input 0-5V) and activate some sort of fail safe mode (RPM limit to 2000RPM if oil pressure dropped below say 25psi)?
by CHB
Fri Oct 20, 2017 8:36 am
Forum: K-Pro / KManager
Topic: K20A3 Base RSX PND ECU controlling K24A2(True 3 lobes VTEC IN/EX)
Replies: 1
Views: 998

K20A3 Base RSX PND ECU controlling K24A2(True 3 lobes VTEC IN/EX)

Hi guys, I am in the plan to upgrade my RSX 02 from K20A3 to K24A3(Australian). I will retain everything from wiring to the 5 speed gearbox and the already upgraded Kpro4 PND ECU. Now, question is will the PND Kpro4 ECU able to control the K24A3 engine correctly as in the the true 3 lobes VTEC (Inta...
by CHB
Sat Jul 08, 2017 6:34 pm
Forum: K-Pro / KManager
Topic: KPro4 PND K20A3 Wideband O2 application
Replies: 1
Views: 867

KPro4 PND K20A3 Wideband O2 application

Anyone can confirm the primary O2 sensor on RSX Base is wideband as Type S/Type R? If not, can I install aftermarket wideband like Innovate LC2, program it to send out signal as stock O2 sensor would, and feed the signal back into ECU(Already have hondata Kpro V4) and run fully closed loop? I know I...
by CHB
Sat Jun 17, 2017 7:25 am
Forum: K-Pro / KManager
Topic: Kpro V4 Digital/Analogue Input & Output wiring
Replies: 1
Views: 1397

Kpro V4 Digital/Analogue Input & Output wiring

Hi guys, Going to send my PND ECU for KPro V4 next week. Just today the dealer told me that the digital/analogue input and output wiring will be hard wired to ECU connector. Won't that will delete some of the factory functionality of the wiring as the way they connect those additional 20 wirings for...