Search found 100 matches
- Fri Apr 07, 2017 9:11 am
- Forum: K-Pro Calibrations
- Topic: In need of a basemap
- Replies: 4
- Views: 1707
Re: In need of a basemap
I recommend having a wideband so you can adjust afr to spec espcially if your gonna full throttle. I also assume you are using the stock 310cc injectors. I advice having the stock o2 sensor plugged/installed so it will help trying to hit 14.7 daily portion.
- Wed Apr 05, 2017 3:04 pm
- Forum: S300 Calibrations
- Topic: I need help with a tune that I recently got please
- Replies: 13
- Views: 9280
Re: I need help with a tune that I recently got please
You can test this revised map of your tune out and see how it does. The only thing i did was lower timing and smooth the powerband out. Let me know how it drives. It would be best if you have a wideband and give me feedback of what your afr look like.
- Sun Apr 02, 2017 10:23 pm
- Forum: S300 Calibrations
- Topic: I need help with a tune that I recently got please
- Replies: 13
- Views: 9280
Re: I need help with a tune that I recently got please
hmm... whoever your tuner is didn't even change your deadtime from 240cc to 440cc :/ Maybe someone with more experience can shine in but i prefer dialing in the deadtime of the injector in before even start tuning. Not sure why but your low cam right before vtec hit timing is bit higher then your vt...
- Wed Mar 22, 2017 5:06 pm
- Forum: S300 Calibrations
- Topic: Basemap b16a skunk2 pro 2 cams needed
- Replies: 1
- Views: 1506
Re: Basemap b16a skunk2 pro 2 cams needed
I set idle at 1k to hold the idle with the bigger cam. Adjust AFR to spec. Let me know how it works and if there is any problem i will help as much as i can.
- Sun Mar 19, 2017 5:49 pm
- Forum: S300 Calibrations
- Topic: H22A ALL MOTOR ITBS BASEMAP NEEDED
- Replies: 3
- Views: 2067
Re: H22A ALL MOTOR ITBS BASEMAP NEEDED
Adjust the AFR to spec with a wideband.
- Sun Mar 19, 2017 5:41 pm
- Forum: S300 Calibrations
- Topic: B18A whit p30 pistons
- Replies: 3
- Views: 1693
Re: B18A whit p30 pistons
timing is a bit conservitive just add fuel and should be a okay basemap.
- Wed Mar 15, 2017 6:20 pm
- Forum: S300 Calibrations
- Topic: LSV NEED TUNE
- Replies: 2
- Views: 2496
Re: LSV NEED TUNE
I would advice to have wideband and adjust afr to spec. Let me know how it do and if you have any problem.
- Wed Mar 15, 2017 6:09 pm
- Forum: S300 Calibrations
- Topic: B18A whit p30 pistons
- Replies: 3
- Views: 1693
Re: B18A whit p30 pistons
Have a wideband install and adjust afr to spec. Timing is retarded a bit to compensated for the higher compression. Let me know how it do and if there is any problem.
- Sun Feb 12, 2017 8:31 pm
- Forum: S300 Calibrations
- Topic: Need a basemap nothing I do seems to help
- Replies: 7
- Views: 3242
Re: Need a basemap nothing I do seems to help
Do you mean adjusting from the fuel table and it is not changing anything on the wideband? if so you should take a look at your exhaust before the o2 sensor if you have an exhaust leak! Most of the time, exhaust leak will cause an similar symptom
- Wed Jan 25, 2017 6:07 pm
- Forum: K-Pro Calibrations
- Topic: Datalog showing negative psi?
- Replies: 7
- Views: 5511
Re: Datalog showing negative psi?
(-) numbers are vaacum. + number is actual boost
- Wed Jan 25, 2017 11:27 am
- Forum: S300 Calibrations
- Topic: Suggestions for B16a2 Basemap
- Replies: 6
- Views: 7045
Re: Suggestions for B16a2 Basemap
Yeah if any problem feel free to pm or comment on here
- Wed Jan 25, 2017 10:18 am
- Forum: S300 Calibrations
- Topic: b16a map issue
- Replies: 3
- Views: 2440
Re: b16a map issue
Try disabling launch control. Reupload a new map and see if you are able to datalog. Is check engine light on?
- Wed Jan 25, 2017 10:03 am
- Forum: S300 Calibrations
- Topic: Suggestions for B16a2 Basemap
- Replies: 6
- Views: 7045
Re: Suggestions for B16a2 Basemap
I would run the jdm p30 since the timing map is slightly lower, which will be a slightly safer too drive until you get it tuned. The hyperlink map that you post will not work for your vehicle because the car have bigger injectors. You will have problem with that map on your car. Idle 14.7, try hitti...
- Tue Jan 24, 2017 4:11 pm
- Forum: S300 Calibrations
- Topic: Suggestions for B16a2 Basemap
- Replies: 6
- Views: 7045
Re: Suggestions for B16a2 Basemap
I would start with the b16 hondata basemap. If you have a wideband adjust afr to spec.
- Sun Jan 15, 2017 11:05 am
- Forum: S300 Calibrations
- Topic: B18C N/A Basemap
- Replies: 9
- Views: 8090
Re: B18C N/A Basemap
Stock b18c map should be capable to run the car. Get a afr hook up and adjust the afr