Search found 138 matches

by Knox
Wed Jan 06, 2016 2:06 am
Forum: S300 Calibrations
Topic: Ecu adds 20% fuel on WOT
Replies: 8
Views: 6942

Ecu adds 20% fuel on WOT

Hi, sometimes I see that ecu adds around 20% fuel on ECTcorrection % at wot.
Note: Fuel compensation table is "0" at that coolant temp compensation table.

Why ecu adds that much fuel even coolant temp compensation table is zero at that temperature?
by Knox
Mon Nov 30, 2015 12:02 pm
Forum: s300 / SManager
Topic: High map pressure on idle
Replies: 2
Views: 1614

Re: High map pressure on idle

Spunkster wrote:The throttle is probably not closing all the way. This is a common issue with large aftermarket throttle bodies and also when the idle controller is removed.
Hi, there is a leakage on throttle gasket.
Thanks for reply.
by Knox
Sat Nov 28, 2015 4:06 pm
Forum: s300 / SManager
Topic: High map pressure on idle
Replies: 2
Views: 1614

High map pressure on idle

Hi, today I installed skunk2 ultra street manifold with skunk2 70mm throttle body and car doesn't idle like it should be. It idles around 60kpa which is 5th column in hondata smanager. I check there is no vacum leakage, I checked the wirings for map sensor etc but I couldn't find the problem. Where ...
by Knox
Thu Oct 22, 2015 5:16 am
Forum: K-Pro / KManager
Topic: KPro / KManager requests
Replies: 146
Views: 828375

Re: KPro / KManager requests

cold start idle rpm ect compensation, rev limit by gear, ignition cut.
by Knox
Fri Oct 02, 2015 8:14 pm
Forum: K-Pro / KManager
Topic: KPro / KManager requests
Replies: 146
Views: 828375

Re: KPro / KManager requests

Hondata wrote:Max vehicle speed would be easier, but would just maximum gear be better still?
Is it possible to add these features?
Rev limit by gear and adjustable idle rpm by ect like s300.
by Knox
Wed Sep 16, 2015 11:34 pm
Forum: K-Pro / KManager
Topic: KPro / KManager requests
Replies: 146
Views: 828375

Re: KPro / KManager requests

Adjustable cold start rev control like s300.
by Knox
Wed Aug 05, 2015 2:14 am
Forum: s300 / SManager
Topic: Fuel pump primes continously
Replies: 3
Views: 2190

Re: Fuel pump primes continously

Serial number on the s300 is 32589 and the software that I'm using is the latest version 2.4.4.0. I tuned this car 1 month ago without a problem after that I starts to make this problem and car doesn't start. I check the car with an other p28+s300 andits working great after that I check the s300(325...
by Knox
Tue Aug 04, 2015 3:21 pm
Forum: s300 / SManager
Topic: Fuel pump primes continously
Replies: 3
Views: 2190

Fuel pump primes continously

Hi, I upload the calibration and ecu shows that I'm online and datalog sensor readings but map sensor read 4600 kps and fuel pump primes in every 2-3 seconds. Is there someone who have this problem before? Note: map sensor is stock and it shows 4600kpa but sometime for just a second it shows 100kpa ...
by Knox
Mon Jul 06, 2015 7:28 am
Forum: s300 / SManager
Topic: deatschwerks injectors
Replies: 15
Views: 8079

Re: deatschwerks injectors

also on flashpro manager and deatschwerks website did not match each other. on "civic si race dw600" calibration it shows that at 12v 1190ms but deatschwerks website shows that 750ms. http://www.deatschwerks.com/products/fuel-injectors/sport-compact/honda/civic/k20-k24/2002-11-k20-k24/21u-...
by Knox
Thu Jul 02, 2015 10:38 am
Forum: s300 / SManager
Topic: deatschwerks injectors
Replies: 15
Views: 8079

Re: deatschwerks injectors

22S-01-0550-4 these are the injectors which I have. Deatschwerks website shows this part number sport compact category for acura integra and rated 550cc. But on smanager there is deatschwerks 600cc (closest) and dead times did not match with deatscgwerks website and smanager does not match. Thanks. ...
by Knox
Thu Jul 02, 2015 5:34 am
Forum: s300 / SManager
Topic: deatschwerks injectors
Replies: 15
Views: 8079

deatschwerks injectors

Hondata or spunkster , Deatschwerks injector dead times which you published on smanager 2.4.2.0 and deatschwerks website does not match each other and also deatschwerks sell 420cc-550cc-800cc injector for b-series not but on smanager there is 600cc-800cc-1000cc, I'm confused. Should I use what deats...
by Knox
Sun May 24, 2015 12:55 am
Forum: K-Pro / KManager
Topic: KPro / KManager requests
Replies: 146
Views: 828375

Re: KPro / KManager requests

Rev limit by gear, ignition + fuel cut. Thanks.
by Knox
Wed May 13, 2015 5:04 am
Forum: K-Pro / KManager
Topic: KManager V4.1.4
Replies: 19
Views: 19555

Re: KManager V4.1.0 (beta)

I used this settings and it's work great without adding 17.5% fuel to the calibration. I think its because of "WOT compensation applied to fuel tables" checked, because I test it without check the "WOT compensation applied to fuel tables" and ecu starts to add 15% to %19 fuel.
by Knox
Mon May 11, 2015 2:39 pm
Forum: K-Pro / KManager
Topic: KManager V4.1.4
Replies: 19
Views: 19555

Re: KManager V4.1.0 (beta)

Just to be clear. You mean, use the same values for WOT compensation tables and Target Lambda tables ? Or you mean check both "WOT compensation fixed at lambda 0.85" and " Enable Target Lambda tables" together? I've re-tested and some of the above information I posted is not corr...
by Knox
Wed May 06, 2015 11:11 am
Forum: K-Pro / KManager
Topic: KManager V4.1.4
Replies: 19
Views: 19555

Re: KManager V4.1.0 (beta)

Ok, thank you for support. Yes - your tuning summary is correct. I do plan to change this behavior though. > Does jdm prc and prd ecu's can use this closed loop target lambda tables with kpro4 borad? Target lambda was added for the PRA and PRB calibration types. The calibration type is independent f...