Search found 39 matches

by Tchleung
Tue Jul 24, 2007 8:25 pm
Forum: s300 / SManager
Topic: Engine Noise? Or Real Knock?
Replies: 3
Views: 2105

Engine Noise? Or Real Knock?

Basically got a fully sleeved and built 2.0L ITR motor yadda yadda. The problem I am having is I keep picking up .72V of knock from 8-10psi range. Doesn't matter on gear or rpm. Only that load range. When it reads that much knock, it'll vary from retarding 6-11* in which it'll completely bog the car...
by Tchleung
Sun Jul 22, 2007 9:09 pm
Forum: s300 / SManager
Topic: boost control issue
Replies: 32
Views: 19342

I have similar issues. Right now I'm using a Hallman Pro MBC now cause it's reliable and works. Even running off the WG spring is rock solid pressure. Anyways. I had my EBC hooked up as per hondata's instructions with all the GM part numbers and it NEVER worked right. If I picked 15% it would boost ...
by Tchleung
Thu Jul 19, 2007 10:37 pm
Forum: s300 / SManager
Topic: Adjusting values after datalogging
Replies: 2
Views: 1704

Adjsut all 4. Then every cell surrounding those 4, adjust those as well to compensate for the change that way everything flows smoothly
by Tchleung
Tue Jul 17, 2007 5:02 pm
Forum: s300 / SManager
Topic: How much boost can you build on the S300?
Replies: 18
Views: 11495

I build 10psi with -20 timing, +20 fuel within a fuel bumps of the limiter. But this is also only at 4800rpm. The higher I set it, the more it will go I'm sure, but I'm in street legal DOT tire class so I don't need much more then that anyways.
by Tchleung
Tue Jul 17, 2007 4:33 pm
Forum: s300 / SManager
Topic: Can't change any values in IGN compensation?!?
Replies: 6
Views: 2750

Nice! Thanks!
by Tchleung
Mon Jul 16, 2007 4:00 pm
Forum: s300 / SManager
Topic: Can't change any values in IGN compensation?!?
Replies: 6
Views: 2750

Thankyou! This is why I love my Hondata. If anything is wrong, you guys don't beat around the bush and avoid it. thankyou again :)

PS: Any idea on when the next major release date is?
by Tchleung
Sun Jul 15, 2007 11:13 pm
Forum: s300 / SManager
Topic: hot start, post start lean problems
Replies: 22
Views: 16161

Just to chime in, I'm having the same problems too. I find if I turn the car off, and turn it back on within 5 minutes. It's no problem. But anywhere from 5mins to 15 mins it'll keep cranking the motor and not fire till about 10 cranks then run lean till it richens up after about 5 mins later. I fin...
by Tchleung
Sun Jul 15, 2007 7:15 am
Forum: s300 / SManager
Topic: How to adjust water and intake temp. compensation %'s
Replies: 3
Views: 2385

If I'm not mistaken, there is the Fuel Compensation tab to adjust correction factor% vs IAT and ECT... Isn't that what you guys are looknig for?
by Tchleung
Sat Jul 14, 2007 9:51 am
Forum: s300 / SManager
Topic: Can't change any values in IGN compensation?!?
Replies: 6
Views: 2750

TTT Basically, my overall goal here is to shorten the throttle tip in retard duration because when I throttle tip in, even with little IGN timing and good a/f, the ECU retards timing, shows 0.00V knock voltage as well which indicates to me the ECU is pulling it back on purpose for throttle tip in. B...
by Tchleung
Fri Jul 13, 2007 8:38 pm
Forum: s300 / SManager
Topic: Can't change any values in IGN compensation?!?
Replies: 6
Views: 2750

Can't change any values in IGN compensation?!?

Uploaded is my tune, the problem I am having is whenever I change any values in the IGN compensation, specifically the IGN retard duration. Nothing changes after I save it. I can change it to whatever I want, save it. Close the program, then reopen it and it's back to the defauly?!? This is same wit...
by Tchleung
Wed Jan 17, 2007 7:12 pm
Forum: s300 / SManager
Topic: how to run 2-files, pump/race gas?
Replies: 12
Views: 5716

jman wrote:soo the maps change as soon as ALL are met
Seriously man...He's already said it a few times...
Spunkster wrote:only when all parameters are met
by Tchleung
Tue Sep 19, 2006 5:04 pm
Forum: s300 / SManager
Topic: Cannot get car to even run with S300!!!
Replies: 24
Views: 12496

My P61(92-93 GSR) ecu arrives next week so I'll pop it into taht and give it a try. I'll keep you guys updated!
by Tchleung
Thu Sep 14, 2006 10:50 pm
Forum: s300 / SManager
Topic: Cannot get car to even run with S300!!!
Replies: 24
Views: 12496

Hondata: Is there anyway to purchase those male to male pins 2 x 14 and 1 x 4 so I can socket it into another ECU? If so please let me know at: tommyhang@hotmail.com with pricing and shipping to CANADA, V2A 6R2 for fastest shipping available. thx
by Tchleung
Thu Sep 14, 2006 5:26 pm
Forum: s300 / SManager
Topic: Cannot get car to even run with S300!!!
Replies: 24
Views: 12496

What does it mean if the RED and GREEN LED's are lit up constant on the S300 whenever powered up and running? EDIT: I tried running it again in a stock vehicle and actually, ti doesn't work etiehr. same sorta symptoms but atleast it idles it better but doesn't run worth shit. I thinkt he fact taht m...
by Tchleung
Wed Sep 13, 2006 7:01 pm
Forum: s300 / SManager
Topic: Cannot get car to even run with S300!!!
Replies: 24
Views: 12496

Welp, put OE dizzy in and it definantly started up alot better then before and "tried" to tidle but was far too lean. I ended up finding out taht even when it seemed to uplaod the tune, nothing would change on the ecu looking at my wideband readigns. didn't matetr weather I uplaoded OE tun...