Hondata

del too )

.....

to Hondata:
Hi! Sometimes, I have error P1129 (Downstream Heated Oxygen Sensors (HO2Ss) swapped from bank to bank). Can you disabled it's? Thanks.
P.S. Civic R18 2006 US.

Zoro2006 wrote:sometimes it's possible to use for a few seconds, but not longer.

?

Zoro2006 wrote:Checked cruise control and seems that it don't want to work as should, sometimes I can enable it but it's very unstable - just swithes off when deaccelerate with button.

My cruise is not working ... only 6 transmission gearbox)

Zoro2006 wrote:please add P0453 error Flag disable in FlashPro V1.2.5 beta to remove check engine light.

+1
and P145?, P0457. Thanks )
P.S. I get an error when cruise control ON.

dan0974 wrote:My IAT is 160 degrees because I'm supercharged

It's very bad. I have supercharger too (1.2 bar on 6500RPM), but my IAT is 30-50 degrees (outside ~20-25 degrees).

GuardianSpider wrote:I just need to know if a FN2 ECU fit on R18A2 if I connect him with a flashpro -> R18 MAP ?

Take US R18 5MT ECU. It's work very good =)

Spunkster wrote:We do not recommend or support using a US ECU in a non-US vehicle.

Why?
I want to have Hondata, but for my car it's no support. What I do?

The US ECU is for a 5 speed transmission, and does not have reverse lockout. Unsupported advice: Find an electronics student and get them to make a simple circuit which feeds the speed sensor pulse via a capacitor to the base of a transistor which controls the lock out relay. It's no good =( Thanks )

What vehicle do you have, and what ECU are you using? I suspect that the lack of reverse lock out is because you have a non-US vehicle with 6 speed. Hi! I have 8th civic 4D, 6MT 2008 and US 5MT ECU 2006. #1 should be disabled, or is on a US vehicle at least. On dinostende restriction triggered by 1...

Hondata,
1. Why have not removed the limit on the speed?
2. I have a set temperature turn cooler 96*C, but it is worked at 101*C. Why?
P.S. In advance, thank you.

Hondata,
I have put R18 MT US ECU in canadian R18 civic. Everything (including FlashPro) is working, but the reverse is not blocked. It is possible to fix this?
Thanks.

Spunkster wrote:There is nothing currently available. I don't know what the future holds on this.

Put US ECU and is to buy flashpro US R18 ECU. I did it and everything is OK.
It's my project (russian only).

to Hondata:
I have put R18 MT US ECU in canadian R18 civic. Everything (including FlashPro) is working, but the reverse is not blocked. It is possible to fix this?
Thanks.