Search found 29 matches
- Wed May 30, 2012 12:25 pm
- Forum: s100/s200
- Topic: s300 hardware problem
- Replies: 21
- Views: 31738
Re: s300 hardware problem
ok so i start work on the car today and find the rad fan swich isnt working so order it in and go to start the car and im only getting 1 green light come on at d4 and none at d2 and when you turn the key you can hear the pump cycle and the dct light comes on but doesnt go off if i hook the laptop up...
- Tue May 29, 2012 7:32 am
- Forum: s100/s200
- Topic: s300 hardware problem
- Replies: 21
- Views: 31738
Re: s300 hardware problem
Ya i checked the wires to the ecu and eveything is in the right spot ... so i take the car out again and it does the same thing 2 blocks away ... so im looking into it more its strange becouse when what ever happend my injectors go to 11.43 ms from 2.47ms at idel ... i thought it might be the map se...
- Mon May 28, 2012 9:02 am
- Forum: s100/s200
- Topic: s300 hardware problem
- Replies: 21
- Views: 31738
Re: s300 hardware problem
found the problem .. before the car left i turned on the o2 heater circut and it is what caused the problem .. i turned it off and the car is fine once again
i checked the wires running to the o2 but couldnt find anything wrong so ill just leave it turned off i gess
i checked the wires running to the o2 but couldnt find anything wrong so ill just leave it turned off i gess
- Sat May 26, 2012 12:22 pm
- Forum: s100/s200
- Topic: s300 hardware problem
- Replies: 21
- Views: 31738
Re: s300 hardware problem
thanks that what i need a starting point ... this all started when i installed the caps on the hondata so ill start there
thanks
thanks
- Sat May 26, 2012 9:02 am
- Forum: s100/s200
- Topic: s300 hardware problem
- Replies: 21
- Views: 31738
Re: s300 hardware problem
here is a pict of the ecu http://i114.photobucket.com/albums/n263/integra_album/h22%20build/IMG_5681.jpg you can see it to the left of the main ecu conectors ... diffrent ecu but this is the one http://i114.photobucket.com/albums/n263/integra_album/h22%20build/IMG_6017.jpg http://i114.photobucket.co...
- Fri May 25, 2012 6:07 pm
- Forum: s100/s200
- Topic: s300 hardware problem
- Replies: 21
- Views: 31738
s300 hardware problem
ok ive got the s300 instaled in a ecu with a clear lid and the leg of the s300 are for the metal top so they where too long so i trimed them down and eveything was ok while the ecu was laying on the floor . now with it mounted the legs on the board were trimed a little too much and alowed the board ...
- Thu May 17, 2012 1:59 pm
- Forum: S300 Calibrations
- Topic: new n/a h22a build
- Replies: 10
- Views: 6867
Re: new n/a h22a build
well the car is tuned enough for the car to leave
cold start is ok but dipps alittle after start but is ok
for the first while in the datalog i was playing with fuel at idle and found out that if the car ran alittle rich it didnt lope at idle
cold start is ok but dipps alittle after start but is ok
for the first while in the datalog i was playing with fuel at idle and found out that if the car ran alittle rich it didnt lope at idle
- Wed May 16, 2012 5:35 am
- Forum: S300 Calibrations
- Topic: new n/a h22a build
- Replies: 10
- Views: 6867
Re: new n/a h22a build
thanks and yes i have no cel
the car is ok and set up till 5000rpm and now working on the cold start ... have to get this finished
this is my best cold start so far
the car is ok and set up till 5000rpm and now working on the cold start ... have to get this finished
this is my best cold start so far
- Tue May 08, 2012 1:58 pm
- Forum: S300 Calibrations
- Topic: new n/a h22a build
- Replies: 10
- Views: 6867
Re: new n/a h22a build
wow what a learning curve ok so i took the car out today and it still wants to die at idle and as you get into the trotal the car wants to break down but as soon as you get around 5000rpm the car evens out and runs great .... so i have to figure out whats diffrent between 0-5000 and 5000+ and i thin...
- Mon May 07, 2012 9:46 am
- Forum: S300 Calibrations
- Topic: new n/a h22a build
- Replies: 10
- Views: 6867
Re: new n/a h22a build
well im close to haveing the car leave found out that i wired the map sensor backwards and after trying the ecu in my own car figured out some things now the car is at idel around 1000 ... cant get any lower as it wants to stall .. thinking its becouse of the cams still sitting a little rich but not...
- Thu May 03, 2012 2:10 pm
- Forum: S300 Calibrations
- Topic: new n/a h22a build
- Replies: 10
- Views: 6867
Re: new n/a h22a build
found a h22a7 tune and its alot better .. at lest the car is idling at 1500 and i can give it some throtal but it want to stall under 1500 so im going to start playing with that tune to get it close
ill let you know tomorow how it goes
ill let you know tomorow how it goes
- Wed May 02, 2012 4:29 pm
- Forum: S300 Calibrations
- Topic: new n/a h22a build
- Replies: 10
- Views: 6867
Re: new n/a h22a build
ill have a look at that
i got tired of trying to get the s300 to work so i put the stock ecu ( unknown chiped) back in and the car runs alot better i could get the car to rev and hold a decent idle for what it was worth
im still going throu all the s300 info so hopefuly i can find something
i got tired of trying to get the s300 to work so i put the stock ecu ( unknown chiped) back in and the car runs alot better i could get the car to rev and hold a decent idle for what it was worth
im still going throu all the s300 info so hopefuly i can find something
- Wed May 02, 2012 10:58 am
- Forum: S300 Calibrations
- Topic: new n/a h22a build
- Replies: 10
- Views: 6867
Re: new n/a h22a build
well here is the first set up that let the car idle http://i114.photobucket.com/albums/n263/integra_album/hondata/Capture.png after that i upped the fuel pressure to 42 with the vacume line off and backed the injector dead time and think the car was a little on the lean side as the header is startin...
- Tue May 01, 2012 8:25 am
- Forum: S300 Calibrations
- Topic: new n/a h22a build
- Replies: 10
- Views: 6867
new n/a h22a build
ive got a h22a with full n/a build and trying to run off the s300 software the build is : h22a block ported and polished head skunk 2 retainers skunk 2 springs stock valves skunk2 pro+1 cam skunk2 cam gears set at 0 venom 440cc injectors afpr at 30psi skunk2 pro intake 69mm throtal body eagle h-beam...