Try to keep this on topic.
Can the bov be opened via Mac solenoid and nitrous output to help control boost.
The car is a drag car and I would only open the bov in first gear. The lowest boost is at 15psi with wastegate off the car. If I open up the bov id like to see 8psi.
Search found 71 matches
- Wed Dec 02, 2015 11:00 am
- Forum: s300 / SManager
- Topic: Boost control with BOV
- Replies: 2
- Views: 1732
- Mon Jun 23, 2014 8:26 pm
- Forum: s300 / SManager
- Topic: random rev limit, boost cut
- Replies: 7
- Views: 3179
Re: random rev limit, boost cut
are you sure it fixed it?BadWay wrote:thanks for the replies. swapped out the distributor and everything is normal now. the distributor had some small damage on the crank angle sensor wheel
I had the same issue with 2.3.3
I then used 2.3.2 for file 1730r and the same issue.
- Sat Mar 29, 2014 9:44 am
- Forum: s300 / SManager
- Topic: SManager 2.3.2
- Replies: 28
- Views: 13543
Re: SManager 2.3.0
Does the new software work with v2?
- Sun Mar 09, 2014 6:55 pm
- Forum: s300 / SManager
- Topic: Boost cut rev limit on when it shouldnt be
- Replies: 5
- Views: 2756
Re: Boost cut rev limit on when it shouldnt be
Didnt have the sensor fixed it was plugged in to the wrong connector.
AIT is now fixed and the 10psi boost cut went away.
AIT is now fixed and the 10psi boost cut went away.
- Mon Mar 03, 2014 10:04 pm
- Forum: s300 / SManager
- Topic: Boost cut rev limit on when it shouldnt be
- Replies: 5
- Views: 2756
Re: Boost cut rev limit on when it shouldnt be
Spunkster wrote:Fix the AIT sensor and see if that resolves the issue.
Sensor is fixed. But its still doing the same thing. All sensors are good.
- Mon Mar 03, 2014 11:26 am
- Forum: s300 / SManager
- Topic: Boost cut rev limit on when it shouldnt be
- Replies: 5
- Views: 2756
- Sun Mar 02, 2014 6:18 pm
- Forum: s300 / SManager
- Topic: Boost cut rev limit on when it shouldnt be
- Replies: 5
- Views: 2756
Boost cut rev limit on when it shouldnt be
At first I thought the engine was breaking up when vtec engaged. I verified vtec worked and then did a couple test pulls on the dyno. I tried vtec, no vtec, and also with the charge pipe disconnected. At first I thought the cut was occurring when vtec would engage. One of the logs shows the boost cu...
- Thu Feb 13, 2014 5:51 pm
- Forum: s300 / SManager
- Topic: On board data log doesnt log analog inputs
- Replies: 1
- Views: 1677
On board data log doesnt log analog inputs
I have my fuel pressure sensor hooked up to Analog 0 on the s300. When i hook up the laptop and record the log I get a good fuel psi read but when I use on board data log it flat lines. I tried both raw voltage and psi but both flat lined on the on bord log. on s300 "upload calibration to s300 ...
- Fri Jan 31, 2014 4:14 pm
- Forum: s300 / SManager
- Topic: Lean protection
- Replies: 3
- Views: 2233
Re: Lean protection
when? months? years?
- Thu Jan 30, 2014 9:07 pm
- Forum: s300 / SManager
- Topic: Lean protection
- Replies: 3
- Views: 2233
Lean protection
Is the "lean protection" bug fixed in 2.2.7?
It wasnt working in the beta version.
It wasnt working in the beta version.
- Sun Sep 22, 2013 12:07 pm
- Forum: s300 / SManager
- Topic: SManager V2.2.7 (beta)
- Replies: 61
- Views: 96746
Re: SManager V2.2.7 (beta)
I have FWD nationals this coming weekend. I have been getting lean afr. It would be nice if the lean cut worked. I need that new verisonSpunkster wrote:It will be fixed in the next release in a week or two.
- Sat Sep 21, 2013 12:57 pm
- Forum: s300 / SManager
- Topic: digital/ analog input on-board log
- Replies: 1
- Views: 1683
digital/ analog input on-board log
do the digital and/or analog inputs work while on-board data logging?
I have noticed the digital input 0 for my plx wide band works when I select the data log button but not when on-board data logging.
I have noticed the digital input 0 for my plx wide band works when I select the data log button but not when on-board data logging.
- Thu Sep 12, 2013 3:59 pm
- Forum: s300 / SManager
- Topic: SManager V2.2.7 (beta)
- Replies: 61
- Views: 96746
Re: SManager V2.2.7 (beta)
Thank you. Please let me know if you find a way to make it work.Spunkster wrote:I have confirmed that there is a bug with the 2.2.7 and lean protection. We are working on it now.
- Thu Sep 12, 2013 4:52 am
- Forum: s300 / SManager
- Topic: SManager V2.2.7 (beta)
- Replies: 61
- Views: 96746
Re: SManager V2.2.7 (beta)
Fuel protection does not work. The afr was leaner then 11.4 in 3rd gear and the boost was well above 19psi. options....settings....units....air fuel is selected. Do I need to change it to lambda for fuel protection to work? The log shows that Im in 4th gear when its really 3rd. I think this is beca...
- Tue Sep 10, 2013 5:30 pm
- Forum: s300 / SManager
- Topic: SManager V2.2.7 (beta)
- Replies: 61
- Views: 96746
Re: SManager V2.2.7 (beta)
do i need to cur resistors or anything in the ecu?Spunkster wrote:Please try the ELD input. The D14 input is not a good input to use as it cannot read the full voltage range.
what settings do I need to change so the "protection settings" use the ELD?