Search found 100 matches

by Zperformance
Fri Apr 07, 2017 9:11 am
Forum: K-Pro Calibrations
Topic: In need of a basemap
Replies: 4
Views: 1707

Re: In need of a basemap

I recommend having a wideband so you can adjust afr to spec espcially if your gonna full throttle. I also assume you are using the stock 310cc injectors. I advice having the stock o2 sensor plugged/installed so it will help trying to hit 14.7 daily portion.
by Zperformance
Wed Apr 05, 2017 3:04 pm
Forum: S300 Calibrations
Topic: I need help with a tune that I recently got please
Replies: 13
Views: 9280

Re: I need help with a tune that I recently got please

You can test this revised map of your tune out and see how it does. The only thing i did was lower timing and smooth the powerband out. Let me know how it drives. It would be best if you have a wideband and give me feedback of what your afr look like.
by Zperformance
Sun Apr 02, 2017 10:23 pm
Forum: S300 Calibrations
Topic: I need help with a tune that I recently got please
Replies: 13
Views: 9280

Re: I need help with a tune that I recently got please

hmm... whoever your tuner is didn't even change your deadtime from 240cc to 440cc :/ Maybe someone with more experience can shine in but i prefer dialing in the deadtime of the injector in before even start tuning. Not sure why but your low cam right before vtec hit timing is bit higher then your vt...
by Zperformance
Wed Mar 22, 2017 5:06 pm
Forum: S300 Calibrations
Topic: Basemap b16a skunk2 pro 2 cams needed
Replies: 1
Views: 1506

Re: Basemap b16a skunk2 pro 2 cams needed

I set idle at 1k to hold the idle with the bigger cam. Adjust AFR to spec. Let me know how it works and if there is any problem i will help as much as i can.
by Zperformance
Sun Mar 19, 2017 5:49 pm
Forum: S300 Calibrations
Topic: H22A ALL MOTOR ITBS BASEMAP NEEDED
Replies: 3
Views: 2066

Re: H22A ALL MOTOR ITBS BASEMAP NEEDED

Adjust the AFR to spec with a wideband.
by Zperformance
Sun Mar 19, 2017 5:41 pm
Forum: S300 Calibrations
Topic: B18A whit p30 pistons
Replies: 3
Views: 1689

Re: B18A whit p30 pistons

timing is a bit conservitive just add fuel and should be a okay basemap.
by Zperformance
Wed Mar 15, 2017 6:20 pm
Forum: S300 Calibrations
Topic: LSV NEED TUNE
Replies: 2
Views: 2496

Re: LSV NEED TUNE

I would advice to have wideband and adjust afr to spec. Let me know how it do and if you have any problem.
by Zperformance
Wed Mar 15, 2017 6:09 pm
Forum: S300 Calibrations
Topic: B18A whit p30 pistons
Replies: 3
Views: 1689

Re: B18A whit p30 pistons

Have a wideband install and adjust afr to spec. Timing is retarded a bit to compensated for the higher compression. Let me know how it do and if there is any problem.
by Zperformance
Sun Feb 12, 2017 8:31 pm
Forum: S300 Calibrations
Topic: Need a basemap nothing I do seems to help
Replies: 7
Views: 3242

Re: Need a basemap nothing I do seems to help

Do you mean adjusting from the fuel table and it is not changing anything on the wideband? if so you should take a look at your exhaust before the o2 sensor if you have an exhaust leak! Most of the time, exhaust leak will cause an similar symptom
by Zperformance
Wed Jan 25, 2017 6:07 pm
Forum: K-Pro Calibrations
Topic: Datalog showing negative psi?
Replies: 7
Views: 5511

Re: Datalog showing negative psi?

(-) numbers are vaacum. + number is actual boost
by Zperformance
Wed Jan 25, 2017 11:27 am
Forum: S300 Calibrations
Topic: Suggestions for B16a2 Basemap
Replies: 6
Views: 7043

Re: Suggestions for B16a2 Basemap

Yeah if any problem feel free to pm or comment on here
by Zperformance
Wed Jan 25, 2017 10:18 am
Forum: S300 Calibrations
Topic: b16a map issue
Replies: 3
Views: 2440

Re: b16a map issue

Try disabling launch control. Reupload a new map and see if you are able to datalog. Is check engine light on?
by Zperformance
Wed Jan 25, 2017 10:03 am
Forum: S300 Calibrations
Topic: Suggestions for B16a2 Basemap
Replies: 6
Views: 7043

Re: Suggestions for B16a2 Basemap

I would run the jdm p30 since the timing map is slightly lower, which will be a slightly safer too drive until you get it tuned. The hyperlink map that you post will not work for your vehicle because the car have bigger injectors. You will have problem with that map on your car. Idle 14.7, try hitti...
by Zperformance
Tue Jan 24, 2017 4:11 pm
Forum: S300 Calibrations
Topic: Suggestions for B16a2 Basemap
Replies: 6
Views: 7043

Re: Suggestions for B16a2 Basemap

I would start with the b16 hondata basemap. If you have a wideband adjust afr to spec.
by Zperformance
Sun Jan 15, 2017 11:05 am
Forum: S300 Calibrations
Topic: B18C N/A Basemap
Replies: 9
Views: 8088

Re: B18C N/A Basemap

Stock b18c map should be capable to run the car. Get a afr hook up and adjust the afr