Hondata

ok, honda knock sensors are on mainly vtec cars, my ecu is non vtec so no knock sensor circuitry to add a sensor. Can i get a aftermarket knock sensor and wire it up and maybe have it wired into smanager?

yeah, .035 is what i ment. im going to try and see if it detonates and go from there

yeah, it works great for 4 years or so now. oh, its a accord too. You think the 7s are fine, Im going to try em, and the gapping, .35? i run a full msd ignition so it should be fine, but i was told and read .26-.29 but ill try it.

its what the shop put in when they tuned it. I can probly run the 7s thats what dsms, evos all run. Its a f22b dohc nonvtec running 9-11 psi 260 whp

by the way, if your locash from locash racing, I am running a locash racing obd2 to obd1 harness from you.

Whats the specifics on this new item.

Any ideas?

Ok, I do not want to use iridium spark plugs. I run heat range 8 or 9 ngk plugs, currently they are non resistor plugs and I want to change them to resistor plugs. What plugs can I use.

Ok, how about what plugs to use that are not iridium, I do NOT want to use irirdium plugs.

Does anyone have any tips on the best turbo timing for our honda engines, namely the twin cam non vtecs.???

ok Im missing something. I cut the wire at the ecu for power steering, and both a/c lines. I grounded them directly to ground. i.e. a wire to the cut wire going to the ecu then strait to ground. nothing worked. I was watching in smanager at the sensor window and nothing would trigger anything to cha...

Thank you, Im going to try this out now. Ill cut the wire and go forward from there.

So i just tap a wire at the clutch switch and run it to the power steering pressure switch at the ecu. do i cut the psp switch wire to only read off the clutch switch when its depressed?

Ok, im searching and trying to figure this out.
Per a search i found that you can wire the clutch switch, not the interlock switch, to the power steering pressure wire at the ecu. is that really it, just run a wire to from the clutch switch to the ecu?

Seemed to fix it.

sorry but i doubt there is, id say to use the h22 map to start, then get it tuned as needed.