Search found 138 matches

by Knox
Fri Jun 22, 2012 6:21 am
Forum: K-Pro Calibrations
Topic: K20A ITR datalog
Replies: 23
Views: 13363

Re: K20A ITR datalog

Spunkster wrote:IT is interpolating between cells and it is displaying a whole number rounded from 32.5 which is 33.
dear spunkster,

why in kmanager i write to use 30 degree cam angle use 33 degree ingition and ecu gives only 31 degree ignition ?
by Knox
Sat Jun 16, 2012 12:16 am
Forum: K-Pro Calibrations
Topic: K20A ITR datalog
Replies: 23
Views: 13363

Re: K20A ITR datalog

On high speed ignition table i write 32 degrees ignition but ecu gives only 30 or 30.5 degree ignition why ?
by Knox
Thu Jun 14, 2012 12:07 pm
Forum: K-Pro Calibrations
Topic: K20A ITR datalog
Replies: 23
Views: 13363

Re: K20A ITR datalog

When knock level excedes the knock threshhold it ads to the knock count. There is no exposed table to edit or view for this. If you want to be able to adjust for a engine that is not stock then you will need to enable the stock knock logic and make adjustments to how it detects knock. I thought tha...
by Knox
Thu Jun 14, 2012 8:46 am
Forum: K-Pro Calibrations
Topic: K20A ITR datalog
Replies: 23
Views: 13363

Re: K20A ITR datalog

http://www.hondata.com/help/kmanager/knock_control.htm?zoom_highlightsub=knock thanks for the link, i read it and i got some points but this is for stock knock logic option. i want to learn if knock threshold is 3.5v it means that engine is near to knocking ? and if knock threshold is 5v is it mean...
by Knox
Tue Jun 12, 2012 4:57 pm
Forum: K-Pro Calibrations
Topic: K20A ITR datalog
Replies: 23
Views: 13363

Re: K20A ITR datalog

Can you explain knock threshold because i try to find some topic but i couldn't.
If knock level Reach to 5v is it means that engine knocking ?
by Knox
Tue Jun 12, 2012 2:42 pm
Forum: K-Pro Calibrations
Topic: K20A ITR datalog
Replies: 23
Views: 13363

Re: K20A ITR datalog

I enabled the "flash mil when knock detected" and increased the ignition when i see the knock i retarded the ignition 2 degrees, when i compare with the k20itr calibration there is 2 more degree of igniton and i think that i could go with that ignition without knock because of 100 octane f...
by Knox
Tue Jun 12, 2012 2:28 pm
Forum: K-Pro Calibrations
Topic: K20A ITR datalog
Replies: 23
Views: 13363

Re: K20A ITR datalog

Dear spunkster, I changed whole ignition tables at 8th 9th and 10th columns (i attached the calibration file). On hondata help file or an other hondata document i read that i shouldn't use the same timging for all rev range and i should add/decrease timing at whole rev range but with different timin...
by Knox
Tue Jun 12, 2012 1:52 pm
Forum: K-Pro Calibrations
Topic: K20A ITR datalog
Replies: 23
Views: 13363

Re: K20A ITR datalog

Ok one last question. In ignition high cam table i enter 33 degree ignition but ecu uses 32 degree if i increase the timing to 34 degree its been 33 degree usually but sometimes it does not change i mean it does not advance the ignition. I did not use stock knock logic so is there any other thing th...
by Knox
Tue Jun 12, 2012 2:32 am
Forum: K-Pro Calibrations
Topic: K20A ITR datalog
Replies: 23
Views: 13363

Re: K20A ITR datalog

when i make datalog, on the display screen it show that there is 33 degree ignition at the same time on sensors and graph screen it show that there is 32 degree of ignition. Which one is correct ?
by Knox
Sun Jun 10, 2012 1:00 pm
Forum: K-Pro Calibrations
Topic: K20A ITR datalog
Replies: 23
Views: 13363

Re: K20A ITR datalog

Hondata any help/advise please..
by Knox
Fri Jun 08, 2012 7:04 pm
Forum: K-Pro Calibrations
Topic: K20A ITR datalog
Replies: 23
Views: 13363

Re: K20A ITR datalog

And also i tuned the afr 12.8. What you think guys for this afr. What is the best afr for power on k20 engines ?
by Knox
Fri Jun 08, 2012 5:37 pm
Forum: K-Pro Calibrations
Topic: K20A ITR datalog
Replies: 23
Views: 13363

K20A ITR datalog

Hello, I'm new on kpro tuning and i did a datalog can anyone check it for me ? My car's mods are: Stock jdm k20a engine Toda header Fujitsubo rm-01a cat back injen cai rbc intake manifold and also i want to ask why the ecu gives command for ignition 33 degrees and ecu use only 32 degrees? calibratio...
by Knox
Mon Jun 13, 2011 4:23 pm
Forum: K-Series Reflash
Topic: JDM Integra Type R PRC ecu reflash
Replies: 4
Views: 3585

Re: JDM Integra Type R PRC ecu reflash

I asked with your UK dealer (CPL Racing) and they said me it can be reflash but anyway I think to save money and go with Kpro. Thank you for reply.
by Knox
Mon Jun 13, 2011 7:21 am
Forum: K-Series Reflash
Topic: JDM Integra Type R PRC ecu reflash
Replies: 4
Views: 3585

Re: JDM Integra Type R PRC ecu reflash

thank you for advise, it will be better to go with kpro.
by Knox
Mon Jun 13, 2011 4:40 am
Forum: K-Series Reflash
Topic: JDM Integra Type R PRC ecu reflash
Replies: 4
Views: 3585

JDM Integra Type R PRC ecu reflash

Hello,

I'm thinking to send my PRC ecu for reflash to a hondata dealer but my question is, hondata reflash is for 91 octane fuel in here Cyprus I have options to 97-100 octane. Is hondata have reflash for high octane ?