Replying to the case above.. I have retrieved the error and the freeze frame of it. Uploaded.
Please solve this issue as soon as possible thank you.
Search found 61 matches
- Thu Apr 28, 2011 3:09 am
- Forum: FlashPro Manager
- Topic: EPS Indicator Popping up
- Replies: 9
- Views: 7941
- Wed Mar 09, 2011 12:08 am
- Forum: FlashPro Manager
- Topic: FlashProManager V1.1.7.4 (beta)
- Replies: 44
- Views: 22137
ECU support
Dear Hondata, Do you intend to add support for 37820-RRH-U93 ECU from the Asian FD2 Auto? They are same as 37820-RRH-U63 that is currently supported by flashpro. Honda changed the code to U93 from U63 after a facelift done to the car in year 2009. I bought an U63 ECU and swapped my U93 to the U63 EC...
- Thu Mar 03, 2011 3:11 am
- Forum: FlashPro Manager
- Topic: EPS Indicator Popping up
- Replies: 9
- Views: 7941
First, are there any speed related errors with the FlashPro, including problems from the gear ratios being different? Can you determine when the EPS indicator comes on? eg after a cold start, when driving at a certain speed, after a high load on the steering? Finally, can you use a Honda scan tool ...
- Thu Jan 13, 2011 2:40 am
- Forum: FlashPro Manager
- Topic: EPS Indicator Popping up
- Replies: 9
- Views: 7941
EPS Indicator Popping up
Dear Hondata, I drive a Civic FD2 Automatic 155HP Asia .. I mentioned this before in another thread. While driving, the EPS indicator pops up once in a while then goes off again after a few secs when I'm running Flashpro calibration. It doesn't show up after returning to stock. It's been bugging me ...
- Fri Dec 17, 2010 8:24 am
- Forum: FlashPro Manager
- Topic: Ignition Advance problem
- Replies: 12
- Views: 5796
EPS indicator: I have not heard of that problem before. You will need to use the Honda scan tool to find out what error is generated by the EPS. Cruise control: No solution for this at the moment. I still suggest reducing the knock retard on the low cam and increasing the knock ignition limit of th...
- Thu Dec 16, 2010 6:59 am
- Forum: FlashPro Manager
- Topic: Ignition Advance problem
- Replies: 12
- Views: 5796
- Thu Dec 02, 2010 2:08 am
- Forum: FlashPro Manager
- Topic: Ignition Advance problem
- Replies: 12
- Views: 5796
By the way, why did you recommend to lower the knock sensitivity for the high cam? I thought the knock retard problem is on the low cam.. By lowering the knock sensitivity you mean increasing the value? There is this !(o) light(exclamation mark with a steering wheel) that pops up once in a while whe...
- Wed Dec 01, 2010 5:55 am
- Forum: FlashPro Manager
- Topic: Ignition Advance problem
- Replies: 12
- Views: 5796
- Wed Dec 01, 2010 3:21 am
- Forum: FlashPro Manager
- Topic: Ignition Advance problem
- Replies: 12
- Views: 5796
- Mon Nov 29, 2010 10:37 pm
- Forum: FlashPro Manager
- Topic: Ignition Advance problem
- Replies: 12
- Views: 5796
- Thu Nov 25, 2010 2:01 am
- Forum: FlashPro Manager
- Topic: Ignition Advance problem
- Replies: 12
- Views: 5796
The ignition is low because of knock retard. If you look at around 8:54 you'll see that in the high cam it is ok but on the low cam a combination of static and dynamic retard is retarding the ignition about 20 degrees. I suggest decreasing the knock sensitivity on the high cam, decreasing the ignit...
- Wed Nov 24, 2010 3:02 am
- Forum: FlashPro Manager
- Topic: Ignition Advance problem
- Replies: 12
- Views: 5796
Ignition Advance problem
Hi, I drive a Civic FD2 Auto 155HP Asia .. I seem to be having a problem with ignition advance dropping to zero with load with pedal.. It made the car lose power when that happened...
What might have caused this?
Image attached with datalog and calibration..
Thank you
What might have caused this?
Image attached with datalog and calibration..
Thank you
- Tue Oct 05, 2010 11:45 pm
- Forum: FlashPro Manager
- Topic: Standalone Datalogging not working
- Replies: 8
- Views: 4960
- Tue Oct 05, 2010 2:47 am
- Forum: FlashPro Manager
- Topic: Standalone Datalogging not working
- Replies: 8
- Views: 4960
How many datalogs do you have stored on the FlashPro and what is their total size? I just updated FlashPro Manager to the new version and updated the Flashpro firmware. But still nothing happens when I press the Datalog button with just the FlashPro connected to the car's OBD2 port. I haven't store...
- Fri Oct 01, 2010 6:49 pm
- Forum: FlashPro Manager
- Topic: Standalone Datalogging not working
- Replies: 8
- Views: 4960