UKDM 5th Gen prelude

Hondata model coverage & ECU application questions.
Post Reply
jlb
Posts: 2
Joined: Wed Feb 09, 2011 4:00 pm

UKDM 5th Gen prelude

Post by jlb »

Hello all,

I am just in the process of converting my Auto 5th Gen UKDM Prelude to a Manual. I wish to run an aftermarket ecu. I know that the Hondata units are only suitable for a manual transmission.

So once the change is done can i simply plug in a hondata ecu with required harness adapter as if the car was a manual from the factory or is there more work that i would need to do?

Thanks in advance.

User avatar
Spunkster
Site Admin
Posts: 18128
Joined: Fri Sep 20, 2002 5:06 pm
Location: Hondata
Contact:

Post by Spunkster »

As long as you have converted everything , then in theory you just need an OBD2-OBD1 adapter, and OBD1 ECU with s300, but since it is a conversion from an Automatic I have no idea of everything you must change in the car.

jlb
Posts: 2
Joined: Wed Feb 09, 2011 4:00 pm

Post by jlb »

Ok thanks. The garage have the car running now still on the auto ecu. so i see no reason why i wouldn't be able to just swop ecu's over.

Post Reply