Flashpro, Sport Mode, 2017 Si, Heat Guage

Hondata model coverage & ECU application questions.
Post Reply
azokie
Posts: 6
Joined: Thu Jun 08, 2017 5:30 pm

Flashpro, Sport Mode, 2017 Si, Heat Guage

Post by azokie » Fri Dec 15, 2017 11:25 am

I have the Flashpro 6+ psi installed with sport mode button on my 2017 Si. I just noticed something when I engage the sport mode. My engine temperature gauge indicator goes to cold or just drops off. When I disengage sport mode, the temperature gauge shows normal temperature. Is this normal and correct functioning? I assume this is normal as I do not notice any alarms. So why is this? Is it because the turbo is taking exhaust and that flow by-passes the engine temperature sensor?

User avatar
Spunkster
Site Admin
Posts: 17744
Joined: Fri Sep 20, 2002 5:06 pm
Location: Hondata
Contact:

Re: Flashpro, Sport Mode, 2017 Si, Heat Guage

Post by Spunkster » Fri Dec 15, 2017 11:42 am

Try re-uploading the calibration to the ECU again and see if the issue persists as it should not change that operation.

azokie
Posts: 6
Joined: Thu Jun 08, 2017 5:30 pm

Re: Flashpro, Sport Mode, 2017 Si, Heat Guage

Post by azokie » Sat Dec 16, 2017 2:44 pm

Thanks Spunkster,

I did a re flash and the issue is now corrected.

Post Reply