Injector Size downgrade: 550cc to 410cc

Hondata model coverage & ECU application questions.
Post Reply
ecronic
Posts: 49
Joined: Tue Jun 14, 2011 2:37 pm

Injector Size downgrade: 550cc to 410cc

Post by ecronic »

Hi All

I've recently purchased grams 550cc injectors. I wanted to know if I can set flashpro to utilise only 410cc instead of 550cc.
Thanks & Regards
------------------------------
Ecronic
User avatar
Spunkster
Site Admin
Posts: 22740
Joined: Fri Sep 20, 2002 5:06 pm
Location: Hondata

Re: Injector Size downgrade: 550cc to 410cc

Post by Spunkster »

Yes you can change the injector size to whatever you are using.
ecronic
Posts: 49
Joined: Tue Jun 14, 2011 2:37 pm

Re: Injector Size downgrade: 550cc to 410cc

Post by ecronic »

Spunkster wrote: Thu Nov 01, 2018 9:19 am Yes you can change the injector size to whatever you are using.
Thank you for your reply.

What I meant was, using 550cc but would like to setup in Flashpro as 410cc. Is that possible? If so, what parameters should I be changing to achieve this?
Thanks & Regards
------------------------------
Ecronic
User avatar
Spunkster
Site Admin
Posts: 22740
Joined: Fri Sep 20, 2002 5:06 pm
Location: Hondata

Re: Injector Size downgrade: 550cc to 410cc

Post by Spunkster »

You need to put in the correct size of the injector you are using. You must also enter the correct dead times for the injectors you are using.
ecronic
Posts: 49
Joined: Tue Jun 14, 2011 2:37 pm

Re: Injector Size downgrade: 550cc to 410cc

Post by ecronic »

Spunkster wrote: Thu Nov 01, 2018 12:19 pm You need to put in the correct size of the injector you are using. You must also enter the correct dead times for the injectors you are using.
Understood! Thanks again!
Thanks & Regards
------------------------------
Ecronic
Post Reply