k24a2 into 98 integra HELP!

Hondata model coverage & ECU application questions.
Post Reply
bvera
Posts: 5
Joined: Mon Apr 08, 2019 8:49 pm

k24a2 into 98 integra HELP!

Post by bvera » Mon Apr 08, 2019 10:20 pm

WARNING:I am 19 just trying to fix up my car. I am an over thinker so super thorough explanations would be helpful. Thanks for your time and patience!
Car: 98' integra
Swap: k24a2 6 speed (Stock)
02-04 rsx engine harness
k-tuned conversion harness
*Have a k-tune immobilizer (last swap)
*Planned kpro'd 37820-PND-a08 eu

I have a 1998 Acura Integra swapping a k24a2 from an 05 tsx. I was told to swap the TB, knock and crank sensor from a k20a/2/3 use an 02-04 rsx harness, proper conversion harness and to load a k24 calibration on a kpro'd ecu.
I plan to send in a 37820-PND-a08 will I be able to load a k24 map to this ecu?

Also, might be a dumb question but what do the "x" mean? (image attached)

Also, since the car is a 98' I still need to pass emissions. Would this in anyway help me with emissions? Or does that all just matter on me doing things properly?

Super appreciative of anyone trying to help me out!
You do not have the required permissions to view the files attached to this post.

User avatar
Spunkster
Site Admin
Posts: 17650
Joined: Fri Sep 20, 2002 5:06 pm
Location: Hondata
Contact:

Re: k24a2 into 98 integra HELP!

Post by Spunkster » Tue Apr 09, 2019 10:36 am

Yes you can use that ECU and load whatever calibration and then tune as you need to.

The X's indicate that it supports that function.

We cannot assist with emissions as the K-Pro is for Race vehicle only that will not be driven on public roads.

bvera
Posts: 5
Joined: Mon Apr 08, 2019 8:49 pm

Re: k24a2 into 98 integra HELP!

Post by bvera » Wed Apr 10, 2019 7:30 am

Thank you! Hondata form asks for vehicle VIN do I provide my vehicle or donor motor VIN?
Ecu came from an rsx
Motor from a 04 tsx
So I have possible three vins assuming I can get the vin from the Rsx.

User avatar
Spunkster
Site Admin
Posts: 17650
Joined: Fri Sep 20, 2002 5:06 pm
Location: Hondata
Contact:

Re: k24a2 into 98 integra HELP!

Post by Spunkster » Wed Apr 10, 2019 9:25 am

Your vehicle VIN

bvera
Posts: 5
Joined: Mon Apr 08, 2019 8:49 pm

Re: k24a2 into 98 integra HELP!

Post by bvera » Wed Apr 10, 2019 9:27 am

Awesome!

bvera
Posts: 5
Joined: Mon Apr 08, 2019 8:49 pm

Re: k24a2 into 98 integra HELP!

Post by bvera » Fri Apr 19, 2019 4:08 pm

Received my hondata now have a couple of questions.
1.) Do I still need the immobilizer bypass?
2.) What are the additional cables(GC98401158) for?
3.) Can I choose the PRB vehicle type even though the ecu is a PND? Only option that contains the tsx 05 basemap.
You do not have the required permissions to view the files attached to this post.

User avatar
Spunkster
Site Admin
Posts: 17650
Joined: Fri Sep 20, 2002 5:06 pm
Location: Hondata
Contact:

Re: k24a2 into 98 integra HELP!

Post by Spunkster » Fri Apr 19, 2019 4:32 pm

You can disable the immobilizer in the calibration.

http://www.hondata.com/help/kmanager/di ... ub=digital
http://www.hondata.com/help/kmanager/an ... sub=analog

Yes you can use the PRB calibration in a PND ECU.

bvera
Posts: 5
Joined: Mon Apr 08, 2019 8:49 pm

Re: k24a2 into 98 integra HELP!

Post by bvera » Fri Apr 19, 2019 4:47 pm

Do I need to use the cables?

User avatar
Spunkster
Site Admin
Posts: 17650
Joined: Fri Sep 20, 2002 5:06 pm
Location: Hondata
Contact:

Re: k24a2 into 98 integra HELP!

Post by Spunkster » Fri Apr 19, 2019 4:54 pm

no you do not

Post Reply