Hondata on d16v1

Hondata model coverage & ECU application questions.
Post Reply
barvic
Posts: 2
Joined: Wed May 06, 2009 12:54 pm

Hondata on d16v1

Post by barvic »

hello, I 'd like to know if hondata's d17 kpro flash will fit on the european d16v1 (civic 2005, looks like an SI)... the engine almost the same as a d17a2 (em2)

ecu partnumber: 37820-PMH-G02

engine:
d16v1:
Image

d17a2
Image

hope someone can help me... there isn't much difference in ecu pinout.. but cannot find any draw from a d16v1..

grtz

Rigo

User avatar
Spunkster
Site Admin
Posts: 18128
Joined: Fri Sep 20, 2002 5:06 pm
Location: Hondata
Contact:

Post by Spunkster »

I cannot tell you if it will work or not, as we do nto have that engine here in the US. You can purchase it and try, but it will be at your own risk.

barvic
Posts: 2
Joined: Wed May 06, 2009 12:54 pm

Post by barvic »

I understand ;)
can you tell me which ecu wires I must have 100% ? maybe I can do some fitting work on d16 connector to have the same signals as d17.. ( I miss some cables though, like an acc wire etc, not much important) but it would be nice if I had a schematic from hondata where alle in- and outputs are shown.. just to see which ones I really need, to make the kpro fit on the d16v1..
I'm sure a lot of people would be happy with it ;)

grtz
Rigo

User avatar
Spunkster
Site Admin
Posts: 18128
Joined: Fri Sep 20, 2002 5:06 pm
Location: Hondata
Contact:

Post by Spunkster »

There is no Hondata diagram like that. You will need to get the Helms manual (factory service manual) for the D17 powered civics and compare to that.

Amorr
Posts: 4
Joined: Thu Jan 15, 2009 1:06 pm
Location: Poland

Post by Amorr »

Nobody likes a European d16v1 ... I am also looking for a good solution.
D16Z6 TD05-16G

zozzancs
Posts: 1
Joined: Tue Aug 16, 2011 4:37 am

Re: Hondata on d16v1

Post by zozzancs »

Any result or progress? Also looking for something for D16V1

Post Reply