exhaust and rh reflash question

Questions / support for the K-Series ECU re-flash
Post Reply
alexanderleesmith
Posts: 1
Joined: Wed Jan 07, 2015 5:31 pm

exhaust and rh reflash question

Post by alexanderleesmith » Wed Jan 07, 2015 5:39 pm

I just recently got an 02 rsx type s. Putting on an injen cai tomorrow. I had a couple questions about the reflash. Heard numerous people say running rh with a catback and reflash can be dangerously lean. My plan for my car are i/rh/e and reflash. Thats all. Is it safe running reflash with these bolt ons? Was wonering what size catback should i go with? And should i buy the rh and caback before i buy reflash, wanted to get reflash first then go with the exhaust. Thanks

User avatar
Spunkster
Site Admin
Posts: 18022
Joined: Fri Sep 20, 2002 5:06 pm
Location: Hondata
Contact:

Re: exhaust and rh reflash question

Post by Spunkster » Thu Jan 08, 2015 10:23 am

On an 02-04 RSX Type S this should be fine. You may want to verify that it is not running lean once you install everything and get the reflash just to be safe.

Post Reply