Civic Type R 7PSI program

K-Series Programmable ECU installation questions / support issues
Locked
menfou
Posts: 85
Joined: Thu Jul 29, 2004 2:31 am
Location: France
Contact:
Contact menfou

Civic Type R 7PSI program

Post by menfou »

Hello,

I just receive my K-PRO card. :mrgreen:

I have a Civic Type R Europe with :
-JRSC 3.4" pulley.
-Injen CAI.
-3" Exhaust.
-JacksonRacing Header.
-RC 550cc Injectors.

I would like to know if It's possible to have wdsonny 7PSI program on my Euro K-PRO ?
What program I need for 7PSI on Euro Civic Type R ?
Top
User avatar
Spunkster
Site Admin
Posts: 22822
Joined: Fri Sep 20, 2002 5:06 pm
Location: Hondata

Post by Spunkster »

You will need to use the K20a2-civictyper-jrsc-550cc.kal. This is for 5 psi, and you will then have to tune the car for the additional boost that you will be running on the dyno.
Top
menfou
Posts: 85
Joined: Thu Jul 29, 2004 2:31 am
Location: France
Contact:
Contact menfou

Post by menfou »

Doug say me don't use the 5PSI program on your 3.4" pulley.
I try to accelerate with 5PSI program and I have misfire

I used the k20a2-rsx-550-jrsc-9psi program to make a PRA-Euro-Civic-TypeR-jrsc-550-7psi , and I have the same problem.

Datalog:
Engine dont run,stop:
http://k20a.free.fr/file/EngineStop.kdl

Engine idle:
http://k20a.free.fr/file/idle.kdl

Engine in 3rd:
http://k20a.free.fr/file/3rd.kld

My 7PSI program for k20a2 Civic Type R Engine:
http://k20a.free.fr/file/k20a2-civictyp ... c-7PSI.kal
Top
menfou
Posts: 85
Joined: Thu Jul 29, 2004 2:31 am
Location: France
Contact:
Contact menfou

Post by menfou »

Image

My A/F is 12.6 until 6000rpm after I have 12.8.
Top
menfou
Posts: 85
Joined: Thu Jul 29, 2004 2:31 am
Location: France
Contact:
Contact menfou

Post by menfou »

I resolved the problem between 6000 and 7100rpm, after 7200rpm I always have knock.
I put more fuel (until 95% DUTY) and I put 20?,19?,18?,17?,16?,15? for ignition and I have knock.

To remove knock the solution is reduce advance ignition and to put more fuel,no ??
Top
menfou
Posts: 85
Joined: Thu Jul 29, 2004 2:31 am
Location: France
Contact:
Contact menfou

Post by menfou »

I have 10 knocks in 3rd when I do 2000-8500rpm, and the first knock is always at 7200rpm.

I put the K20a2-civictyper-jrsc-550cc.kal, and I put for fuel +5,+10,+20,+25% everywhere.
I have the same problem

I put -0.5, -1, -1.5, -2.5, -3, -3.5, and -4? for the ignition and I have always 10 knocks.

CPL-Racing in UK find the solution, but I don't know when he sends me the solution, and I don't know the price :cry:


If you want I can do a datalog for each program ( 11 program) and post them here.
Top
menfou
Posts: 85
Joined: Thu Jul 29, 2004 2:31 am
Location: France
Contact:
Contact menfou

Post by menfou »

I did 7 datalogs this day:

The first is with the original program k20a2-civictyper-jrsc-550cc
http://k20a.free.fr/file/k20a2-civictyp ... -550cc.rar
I have hesitation after 6000rpm and knocks after 7000rpm


The second is with +10% for fuel and -0.5? for ignition
http://k20a.free.fr/file/essai1.rar
I have hesitation after 6000rpm and knocks after 7000rpm

The 3rd is with +10% for fuel and -1? for ignition
http://k20a.free.fr/file/essai2.rar
I have hesitation after 6000rpm and knocks after 7000rpm

The 4th with +10% for fuel and -1.5? for ignition
http://k20a.free.fr/file/essai3.rar
I have hesitation after 6000rpm and knocks after 7000rpm

The 5th with +20% for fuel and -2? for ignition
http://k20a.free.fr/file/essai4.rar
I have hesitation after 6400rpm and knocks after 7000rpm

the 6th with +20% for fuel and -2.5? for ignition
http://k20a.free.fr/file/essai5.rar
I have hesitation after 6400rpm and knocks after 7000rpm

The 7th with +20% for fuel and -3? for ignition
http://k20a.free.fr/file/essai6.rar
I have hesitation after 6400rpm and knocks after 7000rpm
Top
Locked

Return to “K-Pro / KManager”