B21 stays open with 3.3.0

K-Series Programmable ECU installation questions / support issues
Post Reply
Nineteendc5
Posts: 7
Joined: Sun Mar 16, 2014 5:53 pm

B21 stays open with 3.3.0

Post by Nineteendc5 »

I am having the same issue with the new 3.3.0
Tried it on 2 seperate laptops with 3.3.0, but i tried uploading the map on a laptop with 3.2.4 and it works perfectly. I need a fix asap!
User avatar
Spunkster
Site Admin
Posts: 22740
Joined: Fri Sep 20, 2002 5:06 pm
Location: Hondata

Re: B21 stays open with 3.3.0

Post by Spunkster »

Please post your calibration, as I cannot reproduce a problem here.
Nineteendc5
Posts: 7
Joined: Sun Mar 16, 2014 5:53 pm

Re: B21 stays open with 3.3.0

Post by Nineteendc5 »

Spunkster wrote:Please post your calibration, as I cannot reproduce a problem here.
Ok i'll post it today
Nineteendc5
Posts: 7
Joined: Sun Mar 16, 2014 5:53 pm

Re: B21 stays open with 3.3.0

Post by Nineteendc5 »

here is my calibration
Attachments
tx2k14.kal
(146.97 KiB) Downloaded 121 times
User avatar
Spunkster
Site Admin
Posts: 22740
Joined: Fri Sep 20, 2002 5:06 pm
Location: Hondata

Re: B21 stays open with 3.3.0

Post by Spunkster »

That is because you have the activation set to 0 milibar (-14.7 psi or 30 inches of vacuum). Set this to something reasonable like 3 Psi.
Nineteendc5
Posts: 7
Joined: Sun Mar 16, 2014 5:53 pm

Re: B21 stays open with 3.3.0

Post by Nineteendc5 »

Spunkster wrote:That is because you have the activation set to 0 milibar (-14.7 psi or 30 inches of vacuum). Set this to something reasonable like 3 Psi.
I set it like that to see if the boost controller would continously click and it wouldnt.
User avatar
Spunkster
Site Admin
Posts: 22740
Joined: Fri Sep 20, 2002 5:06 pm
Location: Hondata

Re: B21 stays open with 3.3.0

Post by Spunkster »

You are complaining that it is always open. The reason it is always open is because you have it set that way. If you do not want it to always be open then change you setting as I have suggested.
Nineteendc5
Posts: 7
Joined: Sun Mar 16, 2014 5:53 pm

Re: B21 stays open with 3.3.0

Post by Nineteendc5 »

It was set at 2 psi before is what i'm saying. I just didn't change it before i posted it.
Nineteendc5
Posts: 7
Joined: Sun Mar 16, 2014 5:53 pm

Re: B21 stays open with 3.3.0

Post by Nineteendc5 »

Completely uninstalled kmanager and reinstalled and it seems to be working now
sohc_mshue
Posts: 26
Joined: Thu Aug 25, 2005 4:54 pm
Location: Richmond, VA

Re: B21 stays open with 3.3.0

Post by sohc_mshue »

I have the same issue with 3.3.1. Ive never had this issue on cars with the older versions. I even tried reinstalling it.
Post Reply