Can 02-04 PND Kpro4 works with 05-06 Type S Gearbox?

K-Series Programmable ECU installation questions / support issues
Post Reply
CHB
Posts: 44
Joined: Sat May 27, 2017 12:31 am

Can 02-04 PND Kpro4 works with 05-06 Type S Gearbox?

Post by CHB » Mon Sep 17, 2018 6:24 am

Hi Hondata,
As title, can 02-04 PND Kpro4 works with 05-06 Type S Gearbox?
I am going to upgrade the stock 5-speed gearbox to a 6-speed gearbox from 05-06 Type S. My question is how to make the speedo works?

Thanks.

User avatar
Spunkster
Site Admin
Posts: 17934
Joined: Fri Sep 20, 2002 5:06 pm
Location: Hondata
Contact:

Re: Can 02-04 PND Kpro4 works with 05-06 Type S Gearbox?

Post by Spunkster » Mon Sep 17, 2018 11:09 am

You can get this to work with the ECU only, but the gauge cluster will read incorrectly. You will need some kind of speed sensor adapter to change the number of pulses that the cluster receives.

CHB
Posts: 44
Joined: Sat May 27, 2017 12:31 am

Re: Can 02-04 PND Kpro4 works with 05-06 Type S Gearbox?

Post by CHB » Tue Sep 18, 2018 1:06 am

So is it just the calibration file that need to be configured? under which section changes need to be made to the calibration file?

Thanks

User avatar
Spunkster
Site Admin
Posts: 17934
Joined: Fri Sep 20, 2002 5:06 pm
Location: Hondata
Contact:

Re: Can 02-04 PND Kpro4 works with 05-06 Type S Gearbox?

Post by Spunkster » Tue Sep 18, 2018 9:33 am

It is in the Misc. section of parameters. This will have no effect on the cluster readings.

Post Reply