kpro disconnects my usb
kpro disconnects my usb
I am having an issue with the kpro program. ever since i updated it to the newer version i plug it in and then drive around trying to datalog and then the kpro manager says its disconnected and the ignition and all that is offline, is this a known problem, and what should i do?
SHould i reboot the program? anyone else having this problem
SHould i reboot the program? anyone else having this problem
-
- Posts: 17
- Joined: Tue Jun 20, 2006 12:35 pm
I have the latest version downloaded as of last SUNDAY June 18
Im having a similar issue of USB disconnecting.
When I disconnect the USB and plug it back up immediately after I have to go through the whole process of installing the drivers again for me to be able to get online with the ECU.
I just finished building the motor and this weekend will be messing with it again to get it road ready. I hope I don't have any problems on the road getting online..
P
Im having a similar issue of USB disconnecting.
When I disconnect the USB and plug it back up immediately after I have to go through the whole process of installing the drivers again for me to be able to get online with the ECU.
I just finished building the motor and this weekend will be messing with it again to get it road ready. I hope I don't have any problems on the road getting online..
P
I need My boosted Jelly beaNs
-
- Posts: 17
- Joined: Tue Jun 20, 2006 12:35 pm
Don't try an older version of software....that is not the problem and an older version will just give you more problems.
What spark plugs are you using (part number)?
What spark plugs are you using (part number)?
Last edited by Spunkster on Wed Jun 21, 2006 11:27 am, edited 1 time in total.
-
- Posts: 17
- Joined: Tue Jun 20, 2006 12:35 pm
-
- Posts: 17
- Joined: Tue Jun 20, 2006 12:35 pm
Right now I'm prepping for boost...
current setup includes
1000cc injectors w/resistor box
1:1 FPR
BDL Fuel rail
Intank Walboro
Return line
9:1 compression
NGK 2668
Current Kpro Version
Stock head for now...
Below is a screen shot of the window that pops up when trying to install USB drivers...I also get cannot find KproUN.exe wehn installing drivers.
BTW u want me to start my own thread? i dont mean to jijack this one. But it is similar usb issues
current setup includes
1000cc injectors w/resistor box
1:1 FPR
BDL Fuel rail
Intank Walboro
Return line
9:1 compression
NGK 2668
Current Kpro Version
Stock head for now...
Below is a screen shot of the window that pops up when trying to install USB drivers...I also get cannot find KproUN.exe wehn installing drivers.
BTW u want me to start my own thread? i dont mean to jijack this one. But it is similar usb issues
I need My boosted Jelly beaNs
IT1ONBOOST - you have a completely different problem...what version of Windows are you using?
trvotypes - What USB cable are you using? Does it have a bead at each end? THis problem is very common with Greddy Kits and we do not know why. My best guess is that it has something to do with the prtective wrap they use for the wiring harness.
trvotypes - What USB cable are you using? Does it have a bead at each end? THis problem is very common with Greddy Kits and we do not know why. My best guess is that it has something to do with the prtective wrap they use for the wiring harness.