1000cc inj cold idle problems

K-Series Programmable ECU installation questions / support issues
Locked
eggyoak
Posts: 6
Joined: Thu Jul 06, 2006 8:06 pm

1000cc inj cold idle problems

Post by eggyoak » Fri Dec 14, 2007 3:17 pm

well i have a k20a2 turbo running k-pro... im having problems figuring out how to adjust the cold idle fuel enrichment... with my 1000cc injectors i get tons of fuel smoke on cold idle but once it warms up it ildes normal... any help would be greatly appreciated...

thanx randy

User avatar
Spunkster
Site Admin
Posts: 18059
Joined: Fri Sep 20, 2002 5:06 pm
Location: Hondata
Contact:

Post by Spunkster » Fri Dec 14, 2007 4:37 pm

Make changes to the Temp compensation table for the idle and low load areas.

eggyoak
Posts: 6
Joined: Thu Jul 06, 2006 8:06 pm

Post by eggyoak » Fri Dec 14, 2007 8:38 pm

well i must be blind because all i see it IAT temp comp.... i was looking for the temp comp tables for water temp but i couldnt figure it out... where are they located???

eggyoak
Posts: 6
Joined: Thu Jul 06, 2006 8:06 pm

Post by eggyoak » Mon Dec 17, 2007 10:40 pm

any help on this... other than the IAT comp..

hardcorersxs
Posts: 51
Joined: Mon Apr 11, 2005 3:49 am

Post by hardcorersxs » Tue Dec 18, 2007 12:58 am

tune idle and part throttle and have a different map for colder temperatures

eggyoak
Posts: 6
Joined: Thu Jul 06, 2006 8:06 pm

Post by eggyoak » Tue Dec 18, 2007 1:30 pm

that is just a total pain in the ass even free software like Crome alows for ect comp....

hardcorersxs
Posts: 51
Joined: Mon Apr 11, 2005 3:49 am

Post by hardcorersxs » Wed Dec 19, 2007 3:44 pm

eggyoak wrote:that is just a total pain in the ass even free software like Crome alows for ect comp....
K-pro allows for temp compensation (via IAT sensor) as well. Unfortunately, at this time, it does not have ECT Temperature. Maybe a rep from hondata (doug, derek, or javier) can chime in.

Locked