ELD voltage

K-Series Programmable ECU installation questions / support issues
Locked
Mr Aryan
Posts: 45
Joined: Wed May 12, 2004 11:03 am
Contact:

ELD voltage

Post by Mr Aryan » Fri Dec 21, 2007 8:11 pm

Just trying to connect the AEM gauge with the ELD...
i've put the volt vs AFR in the table..

from 14-15afr the gauge and the log show the same... less than 14 it starts to go off like .2...

anyway... my qustion is does the ELD reads less than 1 volt? cause when the gauge reads somewhere in 11s afr, the log stops at 12afr which equels to almost 1 volt.

as per the AEM gauge manual:
1.09 volt = 12.18afr

thanks

User avatar
Hondata
Site Admin
Posts: 8811
Joined: Thu Aug 15, 2002 12:13 pm
Location: Torrance, CA
Contact:

Post by Hondata » Mon Dec 24, 2007 9:43 am

Yes, the ELD can read below 1V
Hondata

hardcorersxs
Posts: 51
Joined: Mon Apr 11, 2005 3:49 am

Post by hardcorersxs » Sat Dec 29, 2007 6:13 pm

for some reason, the datalog doesn't read below 12:1 af. Is it possible for the ELD on the Civic Type-R's to have different ELD voltage?

Mr Aryan
Posts: 45
Joined: Wed May 12, 2004 11:03 am
Contact:

Post by Mr Aryan » Sun Dec 30, 2007 12:55 am

hardcorersxs wrote:for some reason, the datalog doesn't read below 12:1 af. Is it possible for the ELD on the Civic Type-R's to have different ELD voltage?
the ELD option was made for the euro civic type R only, because they don't run factory wideband o2

Locked