Cam timing not operating correctly
Posted: Fri Jan 30, 2009 10:58 pm
I'm doing a tune for my client and i realized that with all the low cam set to 30 degrees cam timing at full throttle, early in the rpm range it starts close to 50 and then finally reduces. Not sure why its doing this but i've attached a log and the 30 low cam map calibration. This also happened on the 20 degrees map as well
As you can see it showed it was lean as well, but the log before in that rpm range showed 13:1 af.
Car and Mod list
2002 Civic Si hatch Ep
K20a Type R Motor
RC 550cc injectors
Brian Crower valve train
Brain Crower Stage 2 cams
2.5" (no Cat) full exh. magnaflow muffler
Buddy Club RH
AEM V2
Look forward to a solution
As you can see it showed it was lean as well, but the log before in that rpm range showed 13:1 af.
Car and Mod list
2002 Civic Si hatch Ep
K20a Type R Motor
RC 550cc injectors
Brian Crower valve train
Brain Crower Stage 2 cams
2.5" (no Cat) full exh. magnaflow muffler
Buddy Club RH
AEM V2
Look forward to a solution