Need Help w/ kal for turbo k24

K-Series Programmable ECU Calibration updates / downloads
Post Reply
triprt
Posts: 4
Joined: Sat Jul 09, 2016 9:28 pm

Need Help w/ kal for turbo k24

Post by triprt » Sun Jul 10, 2016 6:29 pm

Hi,

I need some help with tuning my car. Paid a tuner to tune it and had to tow it home because he did a horrible job. Now I got a LC2 wideband installed up loaded the kal and noticed a few things set wrong. I have 1300cc injectors and he had it set for 1000cc. I got it working a whole lot better now. So here my kal and kdl files please help me out with what i should do. I just want to learn how to do it too.

Engine Specs:
10:3.1 compression wiseco 87mm
eagle rods
type s oil pump
type s water pump
type s oil cooler
4Piston Pro156 PRB head
Prayoonto stage 2 cams
type s cam actuator
Xcessive Intake manifold
S90 76mm throttle body
Garrett GT3582R
PLM turbo mani
tial 44mm wastegate 11.8 spring
honndata boost solenoid

base rsx tranny
carbon snycros
mFactory lsd

Best
Attachments
secondrun.kdl
datalog
(2.14 MiB) Downloaded 61 times
widebandOn.kal
calbration
(161.02 KiB) Downloaded 62 times
Last edited by triprt on Sat Dec 17, 2016 9:11 am, edited 1 time in total.

triprt
Posts: 4
Joined: Sat Jul 09, 2016 9:28 pm

Re: Need Help w/ kal for turbo k24

Post by triprt » Thu Aug 04, 2016 5:33 pm

After a couple of weeks of trial and error it seems to run somewhat better. I have a new kal and dll file. Could someone that knows what to look for help me out with this. That would be great! Thanks in advance for any help. Please disregard my first post. I was still learning how to properly use the kpro.
Attachments
8_4_16Tune.kal
(163.88 KiB) Downloaded 73 times
8_4_16Tune.kdl
(1.9 MiB) Downloaded 49 times

triprt
Posts: 4
Joined: Sat Jul 09, 2016 9:28 pm

Re: Need Help w/ kal for turbo k24

Post by triprt » Sat Dec 17, 2016 9:00 am

Been trying to study how to tune more and I have come up with that you tune each individual cam angle separate. I'm working on my 0 degree angle right now. Seems to be making better progress now as well. Here's my latest KDL file.
Attachments
12-17-16.kdl
(2.56 MiB) Downloaded 64 times

triprt
Posts: 4
Joined: Sat Jul 09, 2016 9:28 pm

Re: Need Help w/ kal for turbo k24

Post by triprt » Sat Dec 17, 2016 9:13 am

Anyone have any tips or tricks to help when doing this?

Post Reply