RSX Type S K24A2 Precision Turbo Running Rich

K-Series Programmable ECU Calibration updates / downloads
Post Reply
wpeej
Posts: 4
Joined: Thu Dec 17, 2015 8:51 am

RSX Type S K24A2 Precision Turbo Running Rich

Post by wpeej » Sun Aug 21, 2016 5:31 am

I have an 02 RSX Type S with a Precision turbo (0.6 compressor, 0.63 exhaust) with 1000cc injectors, Skunk2 intake, generic 2.5" exhaust with cat (came with cat-less 3" turbo muffler that only extended to the middle of the car).
The Hondata ECU (version 2, using latest k-pro update) has the injectors set to 1450cc with 60% duty...if I set the injectors to less than that, the car idles better but runs like crap if trying to accelerate. Currently it runs great when first started, but once warm it stalls easily...even by just pushing in the clutch (stage 3, unknown brand).
Would reinstalling the old muffler solve this issue? Does anyone have a similar setup with a more conservative tune, that would be willing to share their basemap? I'll try to get the datalog and the k-pro file uploaded.

wpeej
Posts: 4
Joined: Thu Dec 17, 2015 8:51 am

Re: RSX Type S K24A2 Precision Turbo Running Rich

Post by wpeej » Sun Aug 21, 2016 6:10 am

Here is the kal file:
Attachments
21Aug2016.kal
K24A2 turbo 1000cc injectors
(164.35 KiB) Downloaded 113 times

User avatar
Spunkster
Site Admin
Posts: 17775
Joined: Fri Sep 20, 2002 5:06 pm
Location: Hondata
Contact:

Re: RSX Type S K24A2 Precision Turbo Running Rich

Post by Spunkster » Mon Aug 22, 2016 9:40 am

Has this been properly tuned on the dyno?

wpeej
Posts: 4
Joined: Thu Dec 17, 2015 8:51 am

Re: RSX Type S K24A2 Precision Turbo Running Rich

Post by wpeej » Mon Aug 22, 2016 2:14 pm

Think so, but it's been at least 3 years and who knows what was done to it during that time.

Post Reply