JDM K20A stock DC5 Calibration

K-Series Programmable ECU Calibration updates / downloads
Post Reply
mkabatek
Posts: 2
Joined: Thu May 16, 2013 8:41 pm

JDM K20A stock DC5 Calibration

Post by mkabatek » Thu Apr 13, 2017 7:12 pm

Hello,

I recently purchased a Kpro V3 PRB ECU. I have a stock JDM K20A (with a cold air intake) out of a DC5. All the default calibrations I see in k-manager are for K20A2, K20Z1, etc.

What calibration should I use that best matches my stock K20A/PRC ECU? Or can someone provide a stock calibration for JDM/K20A. Thanks!

mkabatek
Posts: 2
Joined: Thu May 16, 2013 8:41 pm

Re: JDM K20A stock DC5 Calibration

Post by mkabatek » Thu Apr 13, 2017 8:26 pm

For anyone else interested I found the answer to my question.

There is a k20a-itr kal that should be a suitable start. See screenshot.
IMG_20170413_212451.jpg
IMG_20170413_212451.jpg (1.79 MiB) Viewed 958 times

Post Reply