Page 1 of 1

Part throttle tuning Kpro

Posted: Fri Aug 03, 2018 10:21 pm
by scia22079
hello everyone, new to the forum and I'm hoping I can get some guidance. I recently got my set up going and I'm trying to learn tuning on my own. I felt like I had the basics at least, but then as I got more into it, it just gets more technical and I'm lost. I started with fuel, then I learned I had to adjust the tables for each cam angle, them theres other options like fuel adjustment values etc. I took pretty lengthy datalogs trying to figure things out. My main problem is I cant get my afr for part throttle steady 14.7.. I know it wont be perfect but at times I get dips to 10:1.. I lean the fuel in those areas but they are all over the place and only happen at certain times ie: certain vacuum, load, thrpttle postion. this is a turbo set up and I just wanted some opinions on if I'm doing this correctly, am I on the right track, or should I just scratch it all and start over. ill load a kal I guess my datalog file is too large to upload