K20a2-KproV4-n/a-1000cc-Larger fuel rail-Full exhaust-Intake manifold-Throttle Body-CAI

K-Series Programmable ECU Calibration updates / downloads
Post Reply
Sorvi
Posts: 2
Joined: Fri Mar 08, 2019 11:42 am

K20a2-KproV4-n/a-1000cc-Larger fuel rail-Full exhaust-Intake manifold-Throttle Body-CAI

Post by Sorvi » Fri Mar 08, 2019 11:55 am

Good afternoon,

I have found a base map that starts the car however, its far to rich and has fouled the O2 sensor within 5 starts at no longer than 1 min runtime each.

The current map I have also does not run well enough to have any throttle control. (its not a safe map to continue using), much less to drive with.

Im looking for something safe to get the car to a tuner. the following is what the car has:

The engine and ECU is K20A2 with KproV4 on a 2004 Acura RSX type S.

Skunk2 alpha header,
q300 cat back,
Injen CAI,
Skunk2 74 mill throttle body,
Skunk 2 ultra street manifold,
Grams 1000cc injectors,
Hybrid racing larger fuel rail.

If you are able to help I would appreciate it.
I am currently at work and will try uploading the current map once I get home. (should be about 3.5-4 hours)

Either way thank you in advance.
Steven Sorvillo

Sorvi
Posts: 2
Joined: Fri Mar 08, 2019 11:42 am

Re: K20a2-KproV4-n/a-1000cc-Larger fuel rail-Full exhaust-Intake manifold-Throttle Body-CAI

Post by Sorvi » Wed May 29, 2019 8:47 am

I have been in transition of a new job, and moving to Mechanicsburg area PA. Ill be going to Innovative MotorWorks for a proper dyno tune.
I did search and so far everything I have seen using 1000cc injectors is only a turbo map.

does anyone have a basemap that is not turbo they could donate. im just looking to get the car putting so i can make sure theres no other issues coolant and sensors, just trying to get it ready for the dyno session.

TIA

Post Reply