Odd basemap
Odd basemap
I have a 05 RSX Type S, but had to use the PND base model ECU for my K-pro. I have AEM V2 intake, Skunk 2 fuel rail, Megan racing header, and yonoka exhaust. I have no idea where I should even start with a basemap, but the one I have right now seems to be completely wrong. VTEC doesn't engage, it's sluggish from a stop, cold starts it revs up by itself a couple times before it finally settled to where it should be, and it wants to miss randomly while driving at a cruising speed. Anyone have a basemap for me, or ideas on where to start on it, until I can get to the professional tuner next month?
- CalibratEd
- Posts: 1467
- Joined: Fri Feb 07, 2020 3:20 pm
- Contact:
Re: Odd basemap
I would recommend starting with the stock RSX Type s calibration. Monitor the air fuel ratios and correct as needed.
-Ed
-Ed
Instagram: calibrated.tuning
Re: Odd basemap
I'm on the RSX Type S, cold air intake, Dyno tune calibration that came on the K-pro. Would that be close enough?
Re: Odd basemap
Or should I change it to a 02-04 tune instead of the 05 k20z one?
- CalibratEd
- Posts: 1467
- Joined: Fri Feb 07, 2020 3:20 pm
- Contact:
Re: Odd basemap
I always start with the stock base tune. If there is an 05 stock tune I would use that as well. All base maps will need adjustment.
-Ed
-Ed
Instagram: calibrated.tuning