Hondata Please help me!

K-Series Programmable ECU Calibration updates / downloads
Locked
Tarzan
Posts: 3
Joined: Fri Nov 11, 2005 8:33 pm

Hondata Please help me!

Post by Tarzan »

I have a stock k20a3 Ep si. With a Cybernation with 10psi with 550 rc's. Im currently using your base map for the Rev Hard 550rc's with 10 psi. Is this safe for my car or do you have a current map for the CN kit. Please help me out! At least untill I get a good tune!
User avatar
Spunkster
Site Admin
Posts: 22745
Joined: Fri Sep 20, 2002 5:06 pm
Location: Hondata

Post by Spunkster »

What is listed in the software is all we have. You can make adjustments yourself, but you MUST get the car on a dyno and properly tune it or you may damage your engine
Tarzan
Posts: 3
Joined: Fri Nov 11, 2005 8:33 pm

Post by Tarzan »

Got it tuned this weekend and only made 247hp and 213tq kinda crappy my opinion! Going to another dyno to get another reading.
Razathorn
Posts: 469
Joined: Tue Jun 14, 2005 12:17 am
Location: Lenexa, Kansas, USA

Post by Razathorn »

Tarzan wrote:Got it tuned this weekend and only made 247hp and 213tq kinda crappy my opinion! Going to another dyno to get another reading.
You made about 10hp per pound of boost -- what did you expect?
2003 black RSX type-s / jrsc @ 12psi / methanol injection / aftercooled
Tarzan
Posts: 3
Joined: Fri Nov 11, 2005 8:33 pm

Post by Tarzan »

Razathorn wrote:
Tarzan wrote:Got it tuned this weekend and only made 247hp and 213tq kinda crappy my opinion! Going to another dyno to get another reading.
You made about 10hp per pound of boost -- what did you expect?[/qu
About 30 or 40 more hp. I know it is at least like 270 and like 230tq. And if not, I have a k24 block getting sleeved. Type s head having ported and going to boost around 20 or so psi. Then I will be happy. Bet! :lol:
Locked