Page 1 of 1
Kpro calibration for race header
Posted: Sat Dec 02, 2006 7:03 am
by contectr
Hi..
i have installed tonight my race header OBX 4-2-1 on my euro civic type r PRA ecu..with exhaust only final silencer 60 mm..airbox modified hondata with kn filter..
what calibration i can use ?
i can use the rsx toda header-intake-stock cam?
Posted: Mon Dec 04, 2006 11:30 am
by Hondata
That calibration will not work with the PRA ECU. You'll could start with the type r cams / header / intake calibration, but it will need dyno tuning.
Posted: Mon Dec 04, 2006 11:59 am
by contectr
ok very good..
but this kal don't work...i open it with notepad and modify the ecu value and it work...
it's a problem?
another question..with race header 4-2-1 without kat..generally how many rpm i set the vtec?i think 3500 is too low...
Posted: Mon Dec 04, 2006 3:13 pm
by Spunkster
We do not recommend editing the calibrations with notepad.
Posted: Tue Dec 05, 2006 4:01 am
by contectr
ok spunkster...
i use the pra calibration and start from it!
for race header vtec engage at rpm??????
3500 i think is too low..
Posted: Tue Dec 05, 2006 10:59 am
by Spunkster
I cannot tell you what vtec point to set. You will need to put the car on the dyno and find the ideal vtec point.
Posted: Tue Dec 05, 2006 12:50 pm
by contectr
this is my calibration..