this is not fully tuned but close
mods
K20a type r 11.5:1 CR
Hytech Header
Hytech stg 1 cams with springs/retainers
Hytech RBC
PrototypeRacing Velocity stack
stock type-S TB
Hytech 2.5" to 3" transition & kteller/BurnsStainless 3" exhaust
I also have hytech mod'd oil pump & baffles - hence the 9100 fuel cut
any tips or suggestions would be appreciated
Hytech stg1 cams calibration
Hytech stg1 cams calibration
- Attachments
-
- greghytechstg1.kal
- k20ahytechstg1
- (49.14 KiB) Downloaded 529 times
I want to add - I think my 25" resonator is restricting flow & velocity... due to the packing coming loose inside. which will soon be replaced
when we removed the the 3" exh we picked up 14whp. this will be addressed & then we will retune... as I just heard my vtc should be down near 20-25 around redline... not 35 where it is in the cal attach above
thanks =D doug, derek, & john @ HyTech
when we removed the the 3" exh we picked up 14whp. this will be addressed & then we will retune... as I just heard my vtc should be down near 20-25 around redline... not 35 where it is in the cal attach above
thanks =D doug, derek, & john @ HyTech