just had my car mapped a couple of weeks ago and have just noticed my rad fan stays on alot longer than normal is there any settings on kpro how to set the fan to come on etc
car is not overheating or anything!
not sure if its a setting on k pro or that my thermostatic fan switch is starting to play up and not telling car when to knock fan off
any help would be appreciated on how to set this up?
rad fan setting?
-
- Posts: 16
- Joined: Wed May 21, 2008 12:38 pm
does anybody no what the standard setting is?
i think it must be this as the fan was kicking in and out no problem in the rain yesterday but same problem on a warm day today.
update just checked my map and for some reason it was set to kick in at 177
i checked all the other civic maps pre loaded on k manager and they are all set at 204 so i have just re set it to this
can someone confirm this is a safe setting and what it is ment to be at??
cheers people
i think it must be this as the fan was kicking in and out no problem in the rain yesterday but same problem on a warm day today.
update just checked my map and for some reason it was set to kick in at 177
i checked all the other civic maps pre loaded on k manager and they are all set at 204 so i have just re set it to this
can someone confirm this is a safe setting and what it is ment to be at??
cheers people
-
- Posts: 16
- Joined: Wed May 21, 2008 12:38 pm