K24A4 with 05 RSX Transmission

K-Series Programmable ECU Calibration updates / downloads
Locked
K24Zivic
Posts: 7
Joined: Fri Jul 31, 2009 9:19 pm
Location: Oregon

K24A4 with 05 RSX Transmission

Post by K24Zivic » Fri Jul 31, 2009 9:26 pm

Is there any way to enable the K24A4 calibation with the ability to use the VSS on a 05 RSX transmission. Currently I am just converting a RSX map to the K24A4 calibrations, however this time consuming and leaves lots of room for error.

Thanks
92 Civic VX: 05 K24A4 05 RSX 6 speed 06 Civic Si Shifter Electric water pump Skunk2 Stage 3 Cams OG Hasport header with 3"

User avatar
Spunkster
Site Admin
Posts: 17992
Joined: Fri Sep 20, 2002 5:06 pm
Location: Hondata
Contact:

Post by Spunkster » Mon Aug 03, 2009 10:02 am

No it cannot be enabled.

K24Zivic
Posts: 7
Joined: Fri Jul 31, 2009 9:19 pm
Location: Oregon

Post by K24Zivic » Wed Aug 12, 2009 5:39 pm

Is it possible to use a PRB ECU with the calibration for a K24A4 entered into a RSX-S calibration file and get a low frequency speed signal output from the high frequency 05 RSX VSS?
92 Civic VX: 05 K24A4 05 RSX 6 speed 06 Civic Si Shifter Electric water pump Skunk2 Stage 3 Cams OG Hasport header with 3"

User avatar
Spunkster
Site Admin
Posts: 17992
Joined: Fri Sep 20, 2002 5:06 pm
Location: Hondata
Contact:

Post by Spunkster » Thu Aug 13, 2009 9:38 am

No, for an engine swap you really need to just use an 02-04 transmission, or swap your internals into a 02-04 case with a ring gear.

Locked