jerk while in freeway

s300 and SManager software questions & answers
User avatar
Hondata
Site Admin
Posts: 10428
Joined: Thu Aug 15, 2002 12:13 pm
Location: Torrance, CA
Contact:

Post by Hondata »

We're looking at this problem now to narrow down the conditions which would cause the ECU to reboot.
Hondata
met
Posts: 11
Joined: Thu Feb 25, 2010 9:55 pm

Post by met »

Thursday I installed 1.4.2 and since then I haven't had it happen again. I have drove about 300 miles. Well if there is anything I can help with let me know. Thanks!
User avatar
Hondata
Site Admin
Posts: 10428
Joined: Thu Aug 15, 2002 12:13 pm
Location: Torrance, CA
Contact:

Post by Hondata »

In the beta I have fixed a problem which was resetting the ECU, which could be the same problem as described here. If people with this problem could test the beta version and give feedback I'd appreciate it.

See SManager 1.4.6.0 beta for the changes and download link.
Hondata
blackek4
Posts: 40
Joined: Sun Jan 17, 2010 12:06 pm

Post by blackek4 »

Hondata wrote:In the beta I have fixed a problem which was resetting the ECU, which could be the same problem as described here. If people with this problem could test the beta version and give feedback I'd appreciate it.

See SManager 1.4.6.0 beta for the changes and download link.
how do we test it? just install the new beta, and upload our existing calibration to the ecu trough the new beta version? or do we have to make a new calibration based on the new beta version?
User avatar
Spunkster
Site Admin
Posts: 22703
Joined: Fri Sep 20, 2002 5:06 pm
Location: Hondata

Post by Spunkster »

Just upload your calibration using the new version, like you do with all new versions.
Last edited by Spunkster on Wed Apr 14, 2010 3:35 pm, edited 1 time in total.
blackek4
Posts: 40
Joined: Sun Jan 17, 2010 12:06 pm

Post by blackek4 »

ok, thanks. i'll test it this weekend, and give the feedback here :wink:
met
Posts: 11
Joined: Thu Feb 25, 2010 9:55 pm

Post by met »

I updated it around 3 before I left work and drove about 60 miles, no misses yet. I will update you guys in a few days.
Thanks!
EkJimmy
Posts: 22
Joined: Mon Mar 29, 2010 6:57 pm

Post by EkJimmy »

i drive my wifes car everyday to school and home and notice it would jerk and goes back to normal happens about 3-4 times through out the day. Downloaded the beta and drove for 50miles so far so good. will give an update in a week and see how it does.
diSTiNCt
Posts: 46
Joined: Wed Sep 30, 2009 12:12 am

Post by diSTiNCt »

awesome!
Will try out the 1.4.7 version today!
Since everything else on my car was working fine.
User avatar
Hondata
Site Admin
Posts: 10428
Joined: Thu Aug 15, 2002 12:13 pm
Location: Torrance, CA
Contact:

Post by Hondata »

Thanks for the feedback.
Hondata
XPEHODATA
Posts: 37
Joined: Thu Jun 11, 2009 4:40 pm

Post by XPEHODATA »

Yes. Jerks no more on 1.4.6.
EkJimmy
Posts: 22
Joined: Mon Mar 29, 2010 6:57 pm

Post by EkJimmy »

is there any difference between 1.4.6 and 1.4.7 beta?
blackek4
Posts: 40
Joined: Sun Jan 17, 2010 12:06 pm

Post by blackek4 »

couldn't drive as much as i wanted to test it properly, but the few miles i drove, no jerks. tested with 1.4.7.0.

good job hondata :wink:
met
Posts: 11
Joined: Thu Feb 25, 2010 9:55 pm

Post by met »

I have drove over 300 miles on 1.4.6 and no resets, so im going to give 1.4.7 a try. On a side note, I changed a few settings I turned vtec pressure switch off and also turned in the internal barometer on.
snwbrdrx19
Posts: 38
Joined: Sat Oct 28, 2006 7:27 pm

Post by snwbrdrx19 »

cant say the same here. the car ran much smoother but i still have my bad symptoms. looks like i got a fried ecu :(
Post Reply