jerk while in freeway
-
- Posts: 116
- Joined: Tue Jun 23, 2009 10:51 pm
jerk while in freeway
need help my car jerk in freeway i was looking at the datalog the timing goes 56 deg when it jerk (at 0:01:01.738s and0:01:12.368s) and it seems all sensor goes down and get back to normal..
pls look at my datalog and cal...
thanks
pls look at my datalog and cal...
thanks
-
- Posts: 116
- Joined: Tue Jun 23, 2009 10:51 pm
Re: jerk while in freeway
hmmm, interesting, I have a similar problem but instead of having my ignition spiking, my AFR's go to 10:1 and jerks or feels like it hits a wallallm0t0rGSR wrote:need help my car jerk in freeway i was looking at the datalog the timing goes 56 deg when it jerk (at 0:01:01.738s and0:01:12.368s) and it seems all sensor goes down and get back to normal..
pls look at my datalog and cal...
thanks
-
- Posts: 116
- Joined: Tue Jun 23, 2009 10:51 pm
it happened agen... it seems my afr went to 12.x afr and the vss went 0?
i check everything and it seems everything is in good condistion?
i check everything and it seems everything is in good condistion?
- Attachments
-
- jerk 2.s3d
- datalog2
- (463.6 KiB) Downloaded 174 times
Did you check your engine loom to chassis loom plugs?
I had one of mine not clip 100% in place. car ran fine initially then I had jerking, visually it looked fine but when I pushed it together I heard it click and fixed, might be something as simple as that.
from memory this was giving odd readings for ECT/IAT which changed the fueling/spark due to the compensations.
West
I had one of mine not clip 100% in place. car ran fine initially then I had jerking, visually it looked fine but when I pushed it together I heard it click and fixed, might be something as simple as that.
from memory this was giving odd readings for ECT/IAT which changed the fueling/spark due to the compensations.
West
Its Small, Its Red, Its Mid engined, It has a B18 fitted, 250hp+per tonne + nitrous
This problem begin from 1.4.3 version.
I have jerk at cruise and sometimes at idle. This problem I have once a day, when engine warming, when ECT is changing. VSS went 0 for second. Other sensors readings looks fine. Injectors or ignition not changed. But AFR go crazy - maybe very learn or very rich.
I have b16a with S2S2 cams. EDM ECU (like USDM).
With 1.4.2 and older software all fine!!!
I have jerk at cruise and sometimes at idle. This problem I have once a day, when engine warming, when ECT is changing. VSS went 0 for second. Other sensors readings looks fine. Injectors or ignition not changed. But AFR go crazy - maybe very learn or very rich.
I have b16a with S2S2 cams. EDM ECU (like USDM).
With 1.4.2 and older software all fine!!!
this is exactly the problem i have; people have told me to get a grounding kit.allm0t0rGSR wrote:it happened agen... it seems my afr went to 12.x afr and the vss went 0?
i check everything and it seems everything is in good condistion?
can anyone else confirm that an older version prevents this? if so, does anyone have an older smanger version that they can share?
i have the same problemXPEHODATA wrote:This problem begin from 1.4.3 version.
I have jerk at cruise and sometimes at idle. This problem I have once a day, when engine warming, when ECT is changing. VSS went 0 for second. Other sensors readings looks fine. Injectors or ignition not changed. But AFR go crazy - maybe very learn or very rich.
I have b16a with S2S2 cams. EDM ECU (like USDM).
With 1.4.2 and older software all fine!!!
I ran 1.4.3 and 1.4.4 fine as an every day driver myself, 1.4.4 had an update I questioned hondata for on the behaviour on the nitrous 3 output not saving correctly on 1.4.3 and they updated it just before a drag meet for me and I used 1.4.4 to great effect.
Might be worth going through every option on your map and making sure everything is right if you have not done this yet.
Neil
Might be worth going through every option on your map and making sure everything is right if you have not done this yet.
Neil
Its Small, Its Red, Its Mid engined, It has a B18 fitted, 250hp+per tonne + nitrous
jerk
First off, I have a 97 civic ex with a jdm b18c I have the stock obd2 ecu and with it the car runs fine. When I switch to my dyno tuned obd1 p28 with s300, I have this random miss. I have gone over all the settings many times, so in my case I believe that there is something wrong with my obd1 setup due to the fact it does fine with the stock computer.
For some reason I can't attach my datalog. I have a few of them, so when I go see my tuner this coming week he will know what I'm talking about. If this is a problem with the new revision of the software I would like to know. In the datalog my speed goes from 63mph to 23mph in less than a second and also shows a gear change nothing else seems to account for this. Even though it shows a gear change, I did not change gears. I compared my set-up to known good running tunes and they are very comparable, so I doubt this has to do with any settings.
Can I not attach my log becuase I am new?
For some reason I can't attach my datalog. I have a few of them, so when I go see my tuner this coming week he will know what I'm talking about. If this is a problem with the new revision of the software I would like to know. In the datalog my speed goes from 63mph to 23mph in less than a second and also shows a gear change nothing else seems to account for this. Even though it shows a gear change, I did not change gears. I compared my set-up to known good running tunes and they are very comparable, so I doubt this has to do with any settings.
Can I not attach my log becuase I am new?
-
- Posts: 192
- Joined: Wed Aug 22, 2007 12:41 am