Page 3 of 4

Posted: Tue Apr 13, 2010 8:12 am
by Hondata
We're looking at this problem now to narrow down the conditions which would cause the ECU to reboot.

Posted: Tue Apr 13, 2010 9:26 am
by met
Thursday I installed 1.4.2 and since then I haven't had it happen again. I have drove about 300 miles. Well if there is anything I can help with let me know. Thanks!

Posted: Wed Apr 14, 2010 8:49 am
by Hondata
In the beta I have fixed a problem which was resetting the ECU, which could be the same problem as described here. If people with this problem could test the beta version and give feedback I'd appreciate it.

See SManager 1.4.6.0 beta for the changes and download link.

Posted: Wed Apr 14, 2010 1:56 pm
by blackek4
Hondata wrote:In the beta I have fixed a problem which was resetting the ECU, which could be the same problem as described here. If people with this problem could test the beta version and give feedback I'd appreciate it.

See SManager 1.4.6.0 beta for the changes and download link.
how do we test it? just install the new beta, and upload our existing calibration to the ecu trough the new beta version? or do we have to make a new calibration based on the new beta version?

Posted: Wed Apr 14, 2010 2:16 pm
by Spunkster
Just upload your calibration using the new version, like you do with all new versions.

Posted: Wed Apr 14, 2010 3:14 pm
by blackek4
ok, thanks. i'll test it this weekend, and give the feedback here :wink:

Posted: Wed Apr 14, 2010 5:37 pm
by met
I updated it around 3 before I left work and drove about 60 miles, no misses yet. I will update you guys in a few days.
Thanks!

Posted: Wed Apr 14, 2010 8:06 pm
by EkJimmy
i drive my wifes car everyday to school and home and notice it would jerk and goes back to normal happens about 3-4 times through out the day. Downloaded the beta and drove for 50miles so far so good. will give an update in a week and see how it does.

Posted: Fri Apr 16, 2010 11:40 am
by diSTiNCt
awesome!
Will try out the 1.4.7 version today!
Since everything else on my car was working fine.

Posted: Fri Apr 16, 2010 12:34 pm
by Hondata
Thanks for the feedback.

Posted: Fri Apr 16, 2010 5:36 pm
by XPEHODATA
Yes. Jerks no more on 1.4.6.

Posted: Fri Apr 16, 2010 11:06 pm
by EkJimmy
is there any difference between 1.4.6 and 1.4.7 beta?

Posted: Sun Apr 18, 2010 3:55 pm
by blackek4
couldn't drive as much as i wanted to test it properly, but the few miles i drove, no jerks. tested with 1.4.7.0.

good job hondata :wink:

Posted: Mon Apr 19, 2010 1:08 pm
by met
I have drove over 300 miles on 1.4.6 and no resets, so im going to give 1.4.7 a try. On a side note, I changed a few settings I turned vtec pressure switch off and also turned in the internal barometer on.

Posted: Fri Apr 23, 2010 4:31 pm
by snwbrdrx19
cant say the same here. the car ran much smoother but i still have my bad symptoms. looks like i got a fried ecu :(