probem with output ground ports from ecu

s300 and SManager software questions & answers
Post Reply
Street Dreams
Posts: 2
Joined: Sun Nov 21, 2010 7:31 pm

probem with output ground ports from ecu

Post by Street Dreams »

nevermind
Last edited by Street Dreams on Thu Dec 02, 2010 1:39 pm, edited 1 time in total.
Martian
Posts: 169
Joined: Sun Aug 20, 2006 4:23 pm
Contact:

Post by Martian »

My money is on your testing/using the wrong ecu pin. Go to the help file in Smanager, contents>ECU connectors. Go off that, and remember what it tells you for visual reference at the top.
thank you, thank you, I'm here all week
Street Dreams
Posts: 2
Joined: Sun Nov 21, 2010 7:31 pm

Post by Street Dreams »

sorry nope. i ohm thru the wire for the purge valve a20 all the way to the ecu plugs and had no problem. I know what plug spots go where. My question is does something affect this ground outputs. because i find it very strange that none of my ground ports work, and they did before. the only changes i have made from the last time i used the nitrous over 2 years ago was hooked my wide band up to d10 eld.
User avatar
Spunkster
Site Admin
Posts: 22737
Joined: Fri Sep 20, 2002 5:06 pm
Location: Hondata

Post by Spunkster »

The datalog doesn't match the calibration.
Post Reply