smanager real time lamda readings

s300 and SManager software questions & answers
Post Reply
conway_95ej2
Posts: 1
Joined: Tue Nov 13, 2012 2:10 pm

smanager real time lamda readings

Post by conway_95ej2 »

i have my aem eugo wired in to my ecu as my o2 sensor so i can datalog my af ratios. about a week ago it stopped showing the af numbers on the tables... any ideas here? my af gauge is still working and all my wiring has been doublechecked. please help

PROTO TYPE FI
Posts: 24
Joined: Thu May 31, 2012 9:44 am

Re: smanager real time lamda readings

Post by PROTO TYPE FI »

Does it read anything or read zero? check the voltage on the signal wire to the ecu it should be some where around 0 -7 volts, if you have this check the settings or reload you map hope this helps

Post Reply