launch control settings and rev limit

s300 and SManager software questions & answers
Post Reply
Hermanmax88
Posts: 26
Joined: Fri Sep 14, 2018 7:40 am

launch control settings and rev limit

Post by Hermanmax88 »

When setting launch control ign retard and fuel enrichment, do those settings apply to the other rev limits? For example; if my launch control is set 4k rpm with -20 deg timing and 100 fuel enrichment, will i get the same timing retard and fuel enrichment at my 8600rpm rev limit? What about with full throttle shift?
User avatar
Spunkster
Site Admin
Posts: 22741
Joined: Fri Sep 20, 2002 5:06 pm
Location: Hondata

Re: launch control settings and rev limit

Post by Spunkster »

No it is only for the launch control.
Hermanmax88
Posts: 26
Joined: Fri Sep 14, 2018 7:40 am

Re: launch control settings and rev limit

Post by Hermanmax88 »

Ok so the reason i ask is because my full thottle shift seems to be doing something weird. I have it set to 6k rpm and when i engage it seems to cut rpm completely. It definitely works because it does cut power but It doesn’t bounce off of 6k rpm like it should. Could this be because i am using a fuel and ignition cut? Should I switch to fuel cut only? In your opinion which works best; fuel and ign cut or fuel only?
User avatar
Spunkster
Site Admin
Posts: 22741
Joined: Fri Sep 20, 2002 5:06 pm
Location: Hondata

Re: launch control settings and rev limit

Post by Spunkster »

Post your calibration and a datalog showing the issue.
Post Reply