S300v2 = 34,000rpm and 206th gear?

s300 and SManager software questions & answers
Post Reply
Raf99
Posts: 9
Joined: Sat May 27, 2017 2:46 pm

S300v2 = 34,000rpm and 206th gear?

Post by Raf99 »

All was fine with this P28 / S300v2 for years now. This morning the car was running, working fine. I moved the slider bar in S300, the car died.
Upon trying to start I have a electronic boost solenoid going crazy and SManager showing me this with ACC on. Can't upload, and no parameters available. Is this hardware or software?

https://www.youtube.com/watch?v=rU8RNjbbIwQ
Raf99
Posts: 9
Joined: Sat May 27, 2017 2:46 pm

Re: S300v2 = 34,000rpm and 206th gear?

Post by Raf99 »

More info:

- serial number of the s300 inside the ECU
-- 25793? Red PCB / S300 V2 (not sure where to find the S/N on this)

- version of software being used (Help, About)
-- 2.7.6.0

- the calibration (as an attachment)
-- can't load it

- a datalog of a problem (as an attachment)
-- N/A

- what sort of vehicle you have
-- 1993 honda accord w/ H22A

- what sort of ECU you are using
-- P28 ECU w/ S300 V2 ECU with PWM boost control
Raf99
Posts: 9
Joined: Sat May 27, 2017 2:46 pm

Re: S300v2 = 34,000rpm and 206th gear?

Post by Raf99 »

Did find this post which is close to mine.... , seems the best bet is to try another ECU (which is impossible without purchasing one).

viewtopic.php?t=9863
Raf99
Posts: 9
Joined: Sat May 27, 2017 2:46 pm

Re: S300v2 = 34,000rpm and 206th gear?

Post by Raf99 »

I also found it weird that as soon as I move the slider bar for IACV in SManager the car responds immediately without using the upload button. Live feed option?
Raf99
Posts: 9
Joined: Sat May 27, 2017 2:46 pm

Re: S300v2 = 34,000rpm and 206th gear?

Post by Raf99 »

After re-seating the S300 module etc, this is what I get...... so hopefully it's just the S300 portion and not the ECU. Not sure.
Attachments
20210711_192643.jpg
20210711_192643.jpg (157.49 KiB) Viewed 1679 times
User avatar
Spunkster
Site Admin
Posts: 22745
Joined: Fri Sep 20, 2002 5:06 pm
Location: Hondata

Re: S300v2 = 34,000rpm and 206th gear?

Post by Spunkster »

Do you have your calibration saved on the laptop?
Raf99
Posts: 9
Joined: Sat May 27, 2017 2:46 pm

Re: S300v2 = 34,000rpm and 206th gear?

Post by Raf99 »

Yep. Tried new calibration and clean installs.
User avatar
Spunkster
Site Admin
Posts: 22745
Joined: Fri Sep 20, 2002 5:06 pm
Location: Hondata

Re: S300v2 = 34,000rpm and 206th gear?

Post by Spunkster »

Is J12 cut on the ECU?

With everything plugged in and the ignition in the on position, go to the Help menu and click on “send feedback”. Include a detailed description of the issue.
Raf99
Posts: 9
Joined: Sat May 27, 2017 2:46 pm

Re: S300v2 = 34,000rpm and 206th gear?

Post by Raf99 »

J12 is cut on the ECU. and submitted.
Post Reply