because my B is in a fiat I have to do a bunch of custom wiring. I am working on the fan relay and was going to use the test outputs for this. I have the computer on and connected. I have the ignition on (heard the fuel pump prime) I clicked realtime update, then I went to test output and for a test (as it is loud) I clicked on the fuel pump. nothing,... what am I missing?
Odie
fiat x19 with honda b16
how to get test outputs working
Re: how to get test outputs working
Do you have your calibration open?
Re: how to get test outputs working
I downloaded the calibration. And have it open when I go to test.
Odie
Odie
Re: how to get test outputs working
It sounds like there may be a wiring problem in the vehicle. You should try the ECU in a known working vehicle.
Re: how to get test outputs working
The car runs great (at the moment, it is part fiat after all who knows how long it will last) not sure what would cause testing not to work yet everything else does.
Odie
Odie
Re: how to get test outputs working
got it. not sure why.. so I also last my display (tunerview) so I went to see if the sensors were showing up in live view. nope. googled that and I had to turn off onboard datalogging. upload it, turn it back on and upload it. all is well. very strange. obla di obla da al is working now.
Odie
B16 in a fiat X19
Odie
B16 in a fiat X19