Engine not start with P28+s300

s300 and SManager software questions & answers
Locked
menfou
Posts: 85
Joined: Thu Jul 29, 2004 2:31 am
Location: France
Contact:

Engine not start with P28+s300

Post by menfou »

Hello,

We put a B16A engine in a Civic with a D14 engine.
I used all B16A harness
The engine is 100% stock

I have fuel in all cylinders, the sparkplug have fuel on them.
I have 4 beautifull lightings(flash on the sparkplug)

The engine doesn't start
Attachments
start.s3d
(101 KiB) Downloaded 33 times
b16a.skl
(29.94 KiB) Downloaded 43 times
menfou
Posts: 85
Joined: Thu Jul 29, 2004 2:31 am
Location: France
Contact:

Post by menfou »

You can close this post.
No compression in all cylinders, the engine is dead :shock:
In the mother's prelude I have 177psi in all cylinders
menfou
Posts: 85
Joined: Thu Jul 29, 2004 2:31 am
Location: France
Contact:

Post by menfou »

I checked the engine, and the exhaut camshaft and intake camshaft doesn't have the good position.
My customer need to remove the belt, and put correctly the camshafts.
Locked