Page 1 of 1
cant rev past 4,000
Posted: Sat May 24, 2008 6:10 pm
by 8112
uploads and idles fine. no cel's or error codes. no datalogging. redlight is on with green light flickering once in a while.
tried uploading new calibrations with no luck.
thanks
Re: cant rev past 4,000
Posted: Sun May 25, 2008 5:56 am
by vteczone
8112 wrote:uploads and idles fine. no cel's or error codes. no datalogging. redlight is on with green light flickering once in a while.
tried uploading new calibrations with no luck.
thanks
i had same problem last year,tried swapping distributors & ignition sys. lastly i transfer the whole engine to a different chassis and uses that same s300...and it works fine.so i concluded that it was my ecu wiring harness. may be u could try using different wiring harness..may be thats the prob.
Posted: Sun May 25, 2008 10:40 pm
by ek_hatch
we figured it out, it was bad soldering on the CN2 4 pin header
thanks
Posted: Sat Jun 14, 2008 8:45 pm
by holset hatch
i have something similiar, but mine is much earlier at 2k rpm. where is the CN2 4 pin header and how can i check it?