Setup stock d16y7 with t3 .42/.48 turbo on 7psi with 550cc injectors and s300.
When I switch my ign to on the light is red, then i plug in the usb and it goes green, sometimes the light even turns off and I hear a click and get a CEL. I seems like an electrical issue from a bad soulder or wire connection.
Any second opinions.
Thanks.
S300 problems
-
- Posts: 39
- Joined: Sat Jun 14, 2008 9:45 am
- Location: tx
-
- Posts: 10
- Joined: Mon Aug 11, 2008 5:20 pm
- Location: Exeter,NH
Car does not shut off, only throws a CEL
Gary Wang installed in, he would have no problem fixing it but I am about an hour away from his shop, the only thing I changed was I deleted alll my old datalogs that were 7 to 13 min long when I drove around. Now i cant datalog.
I will get a red light if I start car with cable in the S300, and if there is not one, I will either have to put the cord in or take it out to go green, sometimes it also has no light until i touch it, that is why i think it is a souldering problem.
Gary Wang installed in, he would have no problem fixing it but I am about an hour away from his shop, the only thing I changed was I deleted alll my old datalogs that were 7 to 13 min long when I drove around. Now i cant datalog.
I will get a red light if I start car with cable in the S300, and if there is not one, I will either have to put the cord in or take it out to go green, sometimes it also has no light until i touch it, that is why i think it is a souldering problem.
-
- Posts: 39
- Joined: Sat Jun 14, 2008 9:45 am
- Location: tx
-
- Posts: 10
- Joined: Mon Aug 11, 2008 5:20 pm
- Location: Exeter,NH
-
- Posts: 39
- Joined: Sat Jun 14, 2008 9:45 am
- Location: tx