Page 1 of 1

Enable Lean Protections

Posted: Sun Mar 15, 2009 11:23 pm
by hybridcivicls-t
I have read the help topics and understand what it's asking but im not sure exactly.

My leanest at cruising is in the neighborhood of 16.5 on E85

in boost it's around 11.5ish

Im not sure what would be the correct trigger times.


Posted: Mon Mar 16, 2009 7:26 am
by Martian
Lean 1
Max Lambda:14:1
load: 4psi
triger: 250ms

lean 2
Max Lambda :13:1L
Load: 15psi
Trigger: 100ms

That a good place to start, and can be adjusted if needed.

Posted: Mon Mar 16, 2009 11:52 am
by hybridcivicls-t
Is this setting at WOT?

is the "ms" milli seconds?

and my max boost is 20

Posted: Mon Mar 16, 2009 11:56 am
by Spunkster
You control when it is activated via the settings and yes the ms means miliseconds.

Posted: Mon Mar 16, 2009 12:02 pm
by hybridcivicls-t
ahh ok i get it.

the first lean protection is a fail safe for a lower going into boost and the 2nd is for already into boost and lean conditions take place.

Am I correct?